HOW TO OPERATE
4
Download (DataCD, DataStick)
This part describes how to transfer files (songs or program upgrades) from DataCD or DataStick to
(DataCD)
From the initial Welcome screen, press JB/CD button to switch from JUKE to DISC (DISC1/DISC2) mode. Press OPEN/CLOSE button on the remote control to open the disc drive and insert the DataCD. Press the OPEN/CLOSE button again to close the disc drive.
Do not use the OPEN/CLOSE button on the disc drive itself.
(DataStick)
Connect the DataStick into a USB connector in the back panel of
Press MENU button to show the FUNCTIONS display. Use the 
/ 
buttons to move the cursor to 4. Download and press 
button to enter.
1. Select drive (DISC1 / DISC2 / Removable D: / Removable E:) Select the disc drive which contains the DataCD or DataStick.
2. Overwrite existing data (Yes / No)
Select Yes if overwriting existing data. For program upgrades, set at Yes.
3. Starting song number (xxxxx)
Select a starting number from which the downloaded songs will be stored. Normally it is set as the last song number in the
4. Download from disc/stick (All / Select)
Choose to download all song files or some selected song files only. If some, choose Select and Press 
. A new window SELECT SONGS will appear. Use the 
/
buttons to move along the songs and use 
button to select or unselect each track. When the selection is completed, press 
to return. For program upgrades, set as All.
5. Download songs
Press to begin downloading song files. The song numbers and the titles will be displayed during download. When the downloading is finished, go to 1. Jukebox in the MENU to register the songs files. See 1. Jukebox in Chapter: Advanced Functions for instruction.
6. Program upgrades
Press 
to begin downloading the program upgrades. When completed, reboot
All songs newly downloaded in
53
