21
Figure15 DC Power Supply Terminal Block Positive and Negative Cable Lugs With Protective Sleeving
Step4 For easier cable-management, insert the negative lead cable first. Replace the ground lug with cable in the following
order:
a. Flat Washer
b. Ground lug with negative wire
c. Kepnut screw
1Negative lug and wire with sleeving wrapped around the
wire and end of lug
3Location of sleeving wrapped around the wire and end of
the grounding stud
2Positive lug and wire with sleeving wrapped around the
wire and end of lug
4Earth ground lug and wire
This unit might have more than one power supply connection. All connections must be removed to de-energ
OFF
-48/-60V 40A
280024
1 2
4
3