Cisco Systems CIVS-IPC-2630V manual Video Adjustment, PAL/50 Hz

Chapter 3 Configuring and Managing the IP Camera

Audio/Video Windows

Table 3-9	Video Window Options (continued)
Option		Description
Fixed Video Quality		Specifies that video is output at a fixed quality, which ranges from Very High
		to Very Low. The bit rate may vary to maintain this quality. The default fixed
		quality is Normal. A higher fixed quality provides better video quality but
		consumes more bandwidth.
Max. Frame Rate		Choose the desired maximum frame rate per second for the secondary video
		stream from the IP camera.
		The default value is 5.
		A higher maximum frame rate provides better video quality but consumes
		more bandwidth
Video Adjustment
Video System		Choose the media format that the IP camera should use: NTSC/60 Hz or
		PAL/50 Hz.
		If your IP camera receives a voltage with a 60Hz signal, choose
		NTSC/60 Hz. If your IP camera receives a voltage with a 50 Hz signal,
		choose PAL/50 Hz to prevent flickering in the video image.
Preset		Choose one the following preset white balance modes from the Preset
		drop-down list:
		• Normal—Suitable for most conditions that do not have special lighting
		• Indoor—Suitable for indoor conditions when the Normal setting does
		not provide a clear image
		• Fluorescent—Suitable for indoor conditions with fluorescent lighting
		• Outdoor—Suitable for outdoor conditions
		The default setting is Normal.
Brightness		Choose a positive value to increase the brightness of the video from the IP
		camera or choose a negative value to decrease the brightness. For example,
		if the IP camera is facing a bright light and the video appears too dark, you
		can increase the brightness.
		The default value is Normal, which is suitable for most conditions.
Sharpness		Choose a positive value to increase the sharpness of the video from the IP
		camera or choose a negative value to decrease the sharpness.
		The default value is Normal, which is suitable for most conditions.
Contrast		Choose a positive value to increase the contrast of the video from the IP
		camera or choose a negative value to decrease the contrast.
		The default value is Normal, which is suitable for most conditions.
Saturation		Choose a positive value to increase the saturation of the video from the IP
		camera or choose a negative value to decrease the saturation.
		High saturation provides a vivid, intense color for a video image. With less
		saturation, the video image appears more muted and gray.
		The default value is Normal, which is suitable for most conditions.

	Cisco Video Surveillance 2630 IP Dome User Guide
3-20	OL-24130-02