Snapshot controls, Save | Cisco Systems CIVS-IPC-2630V specification

Chapter 4 Viewing Live Video

Viewing Video through the Home Window Overview

Table 4-1	Home Window Controls (continued)

Control		Description

Microphone Off		Click the Microphone Off button to mute the audio stream that is captured and
toggle button		sent to the IP camera from the internal or external microphone of the PC that you
		are using. When you click this button, the speaker that is attached to the IP camera
		does not play audio that is transmitted from your PC.
		Note If you are simultaneously accessing other IP cameras in different browser
Microphone On
Microphone On		sessions on the same PC, clicking this button in one browser session does
toggle button
toggle button		not mute the audio that the PC sends to the other IP cameras.

		When you click the Microphone Off button, it changes to the Microphone On
		button. Click the Microphone On button to unmute audio that is sent to the IP
		camera. The button changes to the Microphone Off button.
		These buttons appear if half-duplex or full-duplex is enabled for audio. For
		information about enabling half-duplex or full-duplex, see the “Audio Window”
		section on page 3-23.

Microphone		Appears to the right of the Microphone On button or Microphone Off button if
Sensitivity slider		audio is enabled for the IP camera. Use this slider to adjust the gain of the PC
		microphone (that is, how sensitive it is to the audio that it picks up and that is sent
		to the IP camera).

Snapshot controls

Snapshot button		Captures and saves a snapshot image of the current video image in the format and
		location of your choice, and with the file name of your choice.
		When you click this button, follow these steps to save the image:
		1. In the Snapshot window, click Save.
		2. In the Save Picture As window, enter the path and folder for the image, the file
		name for the image, and the format (BMP or JPG) for the image, then click
		Save.

Snapshot Root		Specifies the root folder where snapshot images are to be saved. Click this button
Folder button		to choose the root folder.

IP camera controls

Stream Option	Selects the mode that the IP camera uses for video streaming. The options depend
	on the configuration of the Streaming Mode option in the in the Video window.
	For related information, see the “Video Window” section on page 3-16.

Alarm Output On	Changes the state of the designated IP camera output port (1 or 2) as defined by
button	the Definition Mappings option in the I/O Ports window.
	For information about the Definition Mappings option, see the “Alarm I/O Ports
	Window” section on page 3-35.

Alarm Output Off	Changes the state of the designated IP camera output port (1 or 2) as defined by
button	the Definition Mappings option in the I/O Ports window.
	For information about the Definition Mappings option, see the “Alarm I/O Ports
	Window” section on page 3-35.

Cisco Video Surveillance 2630 IP Dome User Guide

4-4	OL-24130-02

Image 82

Cisco Systems CIVS-IPC-2630V manual Snapshot controls, Save, IP camera controls

Contents

Cisco Video Surveillance 2630 IP Dome User Guide Americas Headquarters Cisco Video Surveillance 2630 IP Dome User Guide N T E N T S Iii Snmp Window Organization OverviewVii Viii Features Features, IP Camera Overview, Physical Details, Package Contents, IP Camera Overview Physical Details Top of the 2630 IP Dome Overview IP Camera Overview Described in the Resetting the IP Camera section on Bottom of the 2630 IP Dome Package Contents Getting Started Before You Begin Preparing for Installation Installing the Cisco Video Surveillance 2630 IP DomePreventing Electrostatic Discharge Damage Passing the Audio Cable through a Ferrite Core Procedure Mounting with a Conduit Base Attaching the Conduit Base to a Ceiling or Wall Attaching Base Plate to Conduit Base See -1 on Attaching the Camera to the Base Plate Cisco Video Surveillance 2630 IP Dome User Guide Mounting with a Pendant Attaching the Privacy Shield and Dome OL-24130-02 Pendant Gasket Conduit base 10 Attaching the Base Plate to the Conduit 11 Attaching the Camera to the Base Plate Performing the Initial Setup of the IP Camera 12 Attaching the Privacy Shield and Dome Protocol//ipaddress Https//203.70.212.521024 Accessing the IP Camera WindowsHttps//192.168.0.100 Http//203.70.212.52 Adjusting the Video Image Http//203.70.212.521024 13 Adjusting the Camera Lens on the 2630 IP Dome Cleaning the IP Camera Powering the IP Camera On or OffResetting the IP Camera Reset Type Procedure Remarks OL-24130-02 Configuring and Managing the IP Camera Configuration Overview Configuration Item Explanation Guidelines for Use Reference See the Privacy Region See the Alarm I/O PortsSee the Audio Window section See the Focus/Zoom Window Navigating the Configuration Windows Snmp Device Settings Setup WindowsBasic Setup Window Option Description Option Description Advanced Setup Window Network Settings Option Bonjour Option Description IP Filter Window QoS EAP-TLS Options Eapol WindowEAP-FAST Options Users Window, Maintenance Window, Firmware Window, Administration WindowsUsers Window Administrator User List Maintenance Window Firmware Window Audio/Video Windows Video Window Dual Streams MPEG-4 + Mjpeg -Configures MPEG-4 for Settings MPEG-4 Settings Mjpeg Settings Resolution Choose the resolution of the Mjpeg video stream Video Adjustment PAL/50 Hz Options Day/Night Vision Option Description Controls section on Audio WindowDuplex Talk and Listen Choose Simplex Talk Only , Half Duplex Talk or Listen , or Privacy Region WindowFocus/Zoom Window Full Duplex Talk and Listen Initialization Window Security WindowsInitialization Window, Complexity Window, Complexity Window Users Window section on Applications Windows Mail/FTP/HTTP Window Primary Smtp Server Described in the Basic Setup Window section onMail Setup Secondary Smtp Server Secondary FTP Mail BodyPrimary FTP Http Notification Motion Detection Window System-provided-name-value-pairs is the event information Event Window Clear button Event ScheduleNew Schedule Trigger Event Mail/FTP/HTTP Window section on Attachment Snmp Window Alarm Output Settings Alarm I/O Ports WindowAlarm Input Settings Manual Control Settings System Window Status WindowsSystem Status Audio Setting Audio/Video Window Network Window Syslog & Log Window Local Log Sys Log Server Message Explanation Log ListSystem log messages Syslog and Log Information Address Address1 Port1 Address2 Port2 , User FTP log messages Video Log Window Smtp log messages Delete button Delete All button OL-24130-02 Viewing Video through the Home Window Overview Home Window Overview Home Window Digital zoom controls Home Window ControlsControl Description Audio controls IP camera controls Snapshot controlsSave For related information, see the Video Window section on Accessing Secondary H.264 Stream Accessing the Primary H.264 StreamViewing Video through Third-Party Devices or Software Accessing the Mjpeg Stream Accessing the Primary MPEG-4 StreamAccessing Dual MPEG-4 Streams Accessing Dual Streams H.264 + Mjpeg Accessing Dual Streams MPEG-4 + Mjpeg OL-24130-02 Troubleshooting Troubleshooting Using the IP Camera with Cisco VSM For instructions, see the Video Window section on OL-24130-02 D E IN-1 IN-2 DSCP, for QoS Dual streaming IN-3 Sdram IN-4 LED IN-5 Options Overview IN-6 IN-7 IN-8