Syslog and Log Information | Cisco Systems CIVS-IPC-2630V specs

Chapter 3 Configuring and Managing the IP Camera

Status Windows

	Table 3-24	Syslog and Log Information (continued)

	Message		Explanation

	Audio: Disable microphone.		Captures information when audio devices are
			enabled or disabled in the Audio window.
	Audio: Disable speaker.		enabled or disabled in the Audio window.
	Audio: Disable speaker.

	Audio: Enable microphone. (audio type: G.711
	A-Law)

	Audio: Enable microphone. (audio type: G.711
	u-Law)

	Audio: Enable microphone. (audio type: G.726)

	Audio: Enable speaker.

	DHCP: Lease release successfully.		Provides information about DHCP activities in
			networks that include DHCP.
	DHCP: Lease release unsuccessfully.		networks that include DHCP.
	DHCP: Lease release unsuccessfully.

	DHCP: Lease renewal successfully.

	DHCP: Lease renewal unsuccessfully.

	DHCP: Timeout error when renewing DHCP
	lease.

	DST: Adjust DST Number hour automatically.		The IP camera has automatically adjusted its clock
			by the indicated number of hours for the beginning
			or end of daylight saving time.

	DST: DST begin.		The IP camera has adjusted its clock for the
			beginning of daylight saving time.

	DST: DST end.		The IP camera has adjusted its clock for the end of
			daylight saving time.

	LOG: Clear all messages.		You have used the Clear Log button to delete the
			log file from the IP camera SDRAM.

	LOG: Log file is full. Start to wrap around.		The IP camera SDRAM is full and existing log
			information is beginning to be overwritten.

	Network: Failed to get the IP address. Camera set		IP camera is unable to obtain an IP address
	to default IP address.		through DHCP and is set to the default IP address
			of 192.168.0.100.

	Network: LAN activated.		IP camera obtained a network IP address.

	Network: Link down.		IP camera lost connection to the network.

	Network: Link up.		IP camera established connection to the network.

	NTP: Failed to synchronize data & time with the		Provides information when you configure the IP
	NTP server.		camera to obtains its time from an NTP server.

	NTP: No NTP server specified.

	NTP: Synchronization OK.

	NTP: The NTP server cannot be reached.

		Cisco Video Surveillance 2630 IP Dome User Guide
		Cisco Video Surveillance 2630 IP Dome User Guide
	OL-24130-02			3-41
	OL-24130-02			3-41

Image 73

Cisco Systems CIVS-IPC-2630V manual Syslog and Log Information

Contents

Americas Headquarters Cisco Video Surveillance 2630 IP Dome User Guide Cisco Video Surveillance 2630 IP Dome User Guide Iii N T E N T S Snmp Window Organization OverviewVii Viii Features, IP Camera Overview, Features IP Camera Overview Physical Details, Package Contents, Top of the 2630 IP Dome Physical Details Overview IP Camera Overview Bottom of the 2630 IP Dome Described in the Resetting the IP Camera section on Package Contents Before You Begin Getting Started Preparing for Installation Installing the Cisco Video Surveillance 2630 IP DomePreventing Electrostatic Discharge Damage Passing the Audio Cable through a Ferrite Core Mounting with a Conduit Base Procedure Attaching the Conduit Base to a Ceiling or Wall Attaching Base Plate to Conduit Base Attaching the Camera to the Base Plate See -1 on Cisco Video Surveillance 2630 IP Dome User Guide Attaching the Privacy Shield and Dome Mounting with a Pendant OL-24130-02 Pendant Gasket Conduit base 10 Attaching the Base Plate to the Conduit 11 Attaching the Camera to the Base Plate 12 Attaching the Privacy Shield and Dome Performing the Initial Setup of the IP Camera Protocol//ipaddress Https//192.168.0.100 Accessing the IP Camera WindowsHttps//203.70.212.521024 Http//203.70.212.52 Http//203.70.212.521024 Adjusting the Video Image 13 Adjusting the Camera Lens on the 2630 IP Dome Resetting the IP Camera Powering the IP Camera On or OffCleaning the IP Camera Reset Type Procedure Remarks OL-24130-02 Configuration Overview Configuring and Managing the IP Camera Configuration Item Explanation Guidelines for Use Reference See the Audio Window section See the Alarm I/O PortsSee the Privacy Region See the Focus/Zoom Window Snmp Navigating the Configuration Windows Basic Setup Window Setup WindowsDevice Settings Option Description Option Description Network Settings Advanced Setup Window Bonjour Option Option Description QoS IP Filter Window EAP-TLS Options Eapol WindowEAP-FAST Options Users Window, Maintenance Window, Firmware Window, Administration WindowsUsers Window User List Administrator Maintenance Window Firmware Window Video Window Audio/Video Windows Settings Dual Streams MPEG-4 + Mjpeg -Configures MPEG-4 for MPEG-4 Settings Resolution Choose the resolution of the Mjpeg video stream Mjpeg Settings PAL/50 Hz Video Adjustment Day/Night Vision Options Option Description Controls section on Audio WindowDuplex Talk and Listen Focus/Zoom Window Privacy Region WindowChoose Simplex Talk Only , Half Duplex Talk or Listen , or Full Duplex Talk and Listen Initialization Window Security WindowsInitialization Window, Complexity Window, Users Window section on Complexity Window Mail/FTP/HTTP Window Applications Windows Mail Setup Described in the Basic Setup Window section onPrimary Smtp Server Secondary Smtp Server Primary FTP Mail BodySecondary FTP Http Notification System-provided-name-value-pairs is the event information Motion Detection Window Event Window New Schedule Event ScheduleClear button Trigger Event Attachment Mail/FTP/HTTP Window section on Snmp Window Alarm Input Settings Alarm I/O Ports WindowAlarm Output Settings Manual Control Settings System Window Status WindowsSystem Status Audio/Video Window Audio Setting Syslog & Log Window Network Window Sys Log Server Local Log Message Explanation Log ListSystem log messages Syslog and Log Information Address FTP log messages Address1 Port1 Address2 Port2 , User Smtp log messages Video Log Window Delete All button Delete button OL-24130-02 Home Window Overview Viewing Video through the Home Window Overview Home Window Control Description Home Window ControlsDigital zoom controls Audio controls Save Snapshot controlsIP camera controls For related information, see the Video Window section on Accessing Secondary H.264 Stream Accessing the Primary H.264 StreamViewing Video through Third-Party Devices or Software Accessing Dual MPEG-4 Streams Accessing the Primary MPEG-4 StreamAccessing the Mjpeg Stream Accessing Dual Streams H.264 + Mjpeg Accessing Dual Streams MPEG-4 + Mjpeg OL-24130-02 Troubleshooting Troubleshooting For instructions, see the Video Window section on Using the IP Camera with Cisco VSM OL-24130-02 IN-1 D E IN-2 IN-3 DSCP, for QoS Dual streaming IN-4 Sdram IN-5 LED IN-6 Options Overview IN-7 IN-8