Cisco Systems CIVS-IPC-2630V manual Privacy Region Window, Focus/Zoom Window

Chapter 3 Configuring and Managing the IP Camera

Audio/Video Windows

Table 3-10	Audio Window Options (continued)
Option		Description
Enable External		Display only. A check indicates that a speaker that is connected to the IP
Speaker		camera is enabled.
		The speaker is enabled when you check the Enable Audio check box and
		choose Simplex - Talk Only, Half Duplex - Talk or Listen, or
		Full Duplex - Talk and Listen to make this check box available.
Audio Type		Choose the codec for audio that is transmitted from the IP camera.
		This option is available when you check the Enable Audio check box and
		choose Simplex - Listen Only, Half Duplex - Talk or Listen, or
		Full Duplex - Talk and Listen.

Privacy Region Window

The Privacy Region window provides options for creating up to four user-defined masking zones that can be used to provide regions of privacy in the camera field of view. Video within privacy regions is not recorded in the camera, nor sent in the video stream. Instead of the actual video, privacy regions display one of the colors available from the Region Color drop-down list.

To display the Privacy Region window, access the configuration windows as described in the “Accessing the IP Camera Windows” section on page 2-6, click Audio/Video, then click Privacy Region.

If you change any options in the Privacy Region window, you must click Apply to save the changes.

Table 3-11describes the options in the Privacy Region window.

Table 3-11	Privacy Region Window Options
Option		Description
Region 1		Check up to four of the Region check boxes to enable privacy regions. A
Region II		window appears in the field of view for each enabled privacy region. To
Region III		configure a window, drag it to the desired area, then drag an edge or corner
Region IV		to resize it. If desired, enter a name of up to 12 characters for each region in
		the text box next to the corresponding check box.
		To disable a privacy region and remove its window from the field of view,
		uncheck the associated check box.
Region Color		Choose a color from the Region Color drop-down list to specify the color
		that will be used to mask the actual video in all enabled privacy regions.

Focus/Zoom Window

The Focus/Zoom window provides controls for remotely setting the focus and zoom level for the IP camera. In addition to the focus and zoom controls, the Focus/Zoom window displays real-time video from the camera, which allows you to achieve the sharpest image for your preferred field of view.

To display the Focus/Zoom window, access the configuration windows as described in the “Accessing the IP Camera Windows” section on page 2-16, click Audio/Video, then click Focus/Zoom.

Table 3-12describes the options in the Focus/Zoom window.

	Cisco Video Surveillance 2630 IP Dome User Guide
3-24	OL-24130-02