Cisco Systems CIVS-IPC-2630V manual Advanced Setup Window, Network Settings

Chapter 3 Configuring and Managing the IP Camera

Setup Windows

Table 3-2	Basic Setup Window Options (continued)
Option		Description
Network Settings
Configuration Type		Choose the option that indicates how the IP camera obtains its IP address:
		• Obtain Address Automatically (DHCP)—If your network includes a
		DHCP server for dynamic allocation of IP addresses, choose this option
		if you want DHCP to assign an IP address and subnet mask to the IP
		camera. Depending on your router, the default gateway, primary DNS
		server, and secondary DNS server may also be assigned. The DHCP
		server must be configured to allocate static IP addresses based on MAC
		addresses so that the IP camera always receives the same address.
		• Fixed IP Address—Choose this option if you want to manually enter an
		IP address, subnet mask, and default gateway for the camera.
IP Address		If you configured the IP camera for a fixed IP address, enter that IP address.
Subnet Mask		If you configured the IP camera for a fixed IP address, enter the subnet mask
		for the IP camera. Use the same value that is configured for the PCs on your
		network.
Gateway		If you configured the IP camera for a fixed IP address, enter the gateway for
		the IP camera. Use the same value that is configured for the PCs on your
		network.
Primary DNS		Optional. Enter the IP address of the primary the DNS server that is used in
		your network. Use the same value that is used for the PCs on your LAN.
		Typically, your ISP provides this address.
		This address is required if you use a DNS name instead of an IP address in
		the SMTP Mail Server field in the Mail & FTP window.
Secondary DNS		Optional. Enter the IP address of a secondary (backup) DNS server to use if
		the primary DNS server is unavailable. Enter the DNS server to be used if
		the primary DNS server is unavailable.

Advanced Setup Window

The Advanced Setup window provides options for configuring various network and protocol settings for the IP camera.

To display the Advanced Setup window, access the configuration windows as described in the “Accessing the IP Camera Windows” section on page 2-16, click Setup, then click Advanced Setup.

If you change any options in the Advanced Setup window, you must click Save to save the changes. To discard the changes, click Cancel before clicking Save. These buttons appear at the bottom of the window. You may need to scroll down to see them.

Table 3-3describes the options in the Advanced Setup window.

Cisco Video Surveillance 2630 IP Dome User Guide

OL-24130-02 3-7