Cisco Systems OL-1089-11 manual Rln, Ln, TN, Intl, Rln, Rpn, Rln, U, Rpn, Ln, Intl CUG RLN

Chapter 1 Billing Interfaces

CDE Detail Description

Table 1-53	Cause Information Element/Parameter Definitions (continued)
Cause				Application	Reference	Location
Class/Value/No.		Definition		(Note 1)	(Note 2)	(Note 3)	Remarks
001/1100/28		Invalid number format (address		DSS 1, ISUP	Q.931	U, RPN,
		incomplete)—indicates that the called party				RLN, LN
		cannot be reached because the called party
					In Q.764, the	TN, INTL	The called
		number is not in a valid format or is not
					following		party number is
		complete.
					sections:		not in a valid
					2.1.1, 2.1.2,		format or is not
							complete
		Note This condition may be determined			2.9.8.3, 2.2.5
			immediately after reception of an end
					Annex A/	TN, INTL,
			of pulsing (ST) signal, or on time-out
					Q.763	RLN, RPN
			after the last received digit.
001/1101/29		Facility rejected—returned when a		DSS 1, ISUP	Q.931	RLN, U,
		supplementary service requested by the user				RPN, LN
		cannot be provided by the network.
						TN, INTL	Inability to
							provide a
							request
							signaling
							capability
					Q.735.1	INTL,	CUG
						RLN
					Q.737.1	INTL, TN,	UUS
						RLN
001/1110/30		Response to STATUS ENQUIRY—included		DSS 1	Q.931	U, LN
		in the STATUS message when the reason for
		generating the STATUS message was the prior
		receipt of a STATUS ENQUIRY message.

Cisco Media Gateway Controller Software Release 9 Billing Interface Guide

1-80 OL-1089-11