Cisco Systems OL-1089-11 manual Charge Unit Number Tag, Charge Indicator Tag

Chapter 1 Billing Interfaces

CDE Detail Description

Charge Unit Number (Tag: 4082)

Table 1-127	Charge Unit Number Description Form
Name: Charge Unit Number		Tag: 4082	Source: MDL
Description/Purpose: Used for reporting Advice of Charge information.
Format: BE		Length in Octets: 1

Data Value:

Comprised of an integer containing the Charge Unit Number, provisioned as part of the Dial Plan provisioning ANSI/ITU Variations: None

Valid Range: 0-255

Extended Data Value: No extended value.

General Information: The data for this CDR is assigned by SCP and transparently passed to CDR.

MGC Release: Release 9.3(2) and later.

Charge Indicator (Tag: 4083)

Table 1-128	Charge Indicator Description Form
Name: Charge Indicator		Tag: 4083	Source: MDL
Description/Purpose: Allows the carrier to determine whether certain calls need to be billed.
Format: BE		Length in Octets: 1
Data Value:

Charge Indicator information is 2 bit and is defined as follows:

01No Charge

10Charge

00No Indication

Extended Data Value: No extended value.

General Information:

MGC Release: Release 9.5(2) and later.

	Cisco Media Gateway Controller Software Release 9 Billing Interface Guide
OL-1089-11		1-125