Cisco Systems OL-1089-11 manual Isup, Dss, Rln Uus

Chapter 1 Billing Interfaces

CDE Detail Description

Table 1-53	Cause Information Element/Parameter Definitions (continued)
Cause			Application	Reference	Location
Class/Value/No.		Definition	(Note 1)	(Note 2)	(Note 3)	Remarks
101/0110/86		Call having the requested call identity has	DSS 1	Q.931	LN
		been cleared—indicates that the network has
		received a call resume request containing a
		call identity information element indicating a
		suspended call that has in the meantime been
		cleared while suspended (either by network
		timeout or by the remote user).
101/0111/87		User not member of CUG—indicates that the	ISUP, DSS 1	Q.735.1	RLN	CUG
		called user for the incoming CUG call is not a
		member of the specified CUG or that the
		calling user is an ordinary subscriber calling a
		CUG subscriber.
101/1000/88		Incompatible destination—indicates that the	DSS 1, ISUP	Q.931	U, RPN
		equipment sending this cause has received a
			ISUP	Q.737.1	RLN	UUS 2
		request to establish a call which has low layer
		compatibility, high layer compatibility, or
		other compatibility attributes (for example,
		data rate) which cannot be accommodated.
101/1010/90		Non-existent CUG	ISUP	Q.735		CUG
101/1011/91		Invalid transit network selection (national	DSS 1,	Q.931	LN, TN
		use)—indicates that a transit network	ISUP(NU)
		identification was received which is of an
		incorrect format as defined in Annex C/
		Q.931.
101/1111/95		Invalid message, unspecified—used to report	DSS 1, ISUP	Q.931	LN
		an invalid message event only when no other
				Annex A/
		cause in the invalid message class applies.
				Q.763
110/0000/96		Mandatory information element is missing—	DSS 1	Q.931	U, LN
		indicates that the equipment sending this
		cause has received a message which is
		missing an information element which must
		be present in the message before that message
		can be processed.
110/0001/97		Message type non-existent or not	DSS 1, ISUP	Q.931	U, LN
		implemented—indicates that the equipment
				From Q.764,	TN, INTL,
		sending this cause has received a message
				the following	RLN
		with a message type it does not recognize
				sections:
		either because this is a message not defined or
				2.9.5.2,
		defined but not implemented by the
		equipment sending this cause.		2.9.5.3

Cisco Media Gateway Controller Software Release 9 Billing Interface Guide

OL-1089-11 1-85