Cisco Systems OL-1089-11 manual Cause Application Reference Location, Definition Remarks

Chapter 1 Billing Interfaces

CDE Detail Description

Table 1-52 Reason Code Description Form (continued)

Cause value: (only applicable in the context of Recommendations Q.763 and Q.931)

The cause value is divided into two fields, a class (bits 5 through 7) and a value within the class (bits 1 through 4).

The class indicates the general nature of the event. The valid values are as follows:

000Normal event

001Normal event

010Resource unavailable

011Service or option not available

100Service or option not implemented

101Invalid message (for example, parameter out of range)

110Protocol error (for example, unknown message)

111Interworking

The valid class values are listed in Table 1-53.

Extended Data Value:

Note Tag 3008 extends ANSI definition by adding COT failure indicators according to ANSI rules, with slight modification as follows:

Octet 1:

Extension 0

Coding Standard 11

Spare 0

Location 0011

Octet 2:

Extension 1

Cause 1111110

General Information:

MGC Release: Release 7.0 and later.

The following table lists the Cause information element or parameter definitions for this tag.

Table 1-53	Cause Information Element/Parameter Definitions
Cause			Application	Reference	Location
Class/Value/No.		Definition	(Note 1)	(Note 2)	(Note 3)	Remarks
000/0001/1		Unallocated (unassigned) number—indicates	DSS 1, ISUP	Q.931	U, RPN,
		that the called party cannot be reached			LN
		because, although the called party number is
					RLN, TN,	No route by
		in a valid format, it is not currently allocated
					INTL	digit analysis
		(assigned)

Cisco Media Gateway Controller Software Release 9 Billing Interface Guide

1-76 OL-1089-11