Cisco Systems OL-1089-11 Transit Network Selection Tag 3013/ITU, Length in Octets 1-n Data Value

Chapter 1 Billing Interfaces

CDE Detail Description

Transit Network Selection (Tag: 3013/ITU)

Table 1-58	Transit Network Selection Description Form
Name: Transit Network Selection				Tag: 3013				Source: MDL
Description/Purpose: Used to identify each previous network type transited.
Format: ITU-T Q.763				Length in Octets: 1-n
Data Value:
	8	7	6		5	4	3	2	1
1	Odd/Even	Type of network identification					Network identification plan
2
.
.					Network identification
.
2n

The following codes are used in the subfields of the transit network selection parameter field:

Odd/even indicator

0Even number of digits 1Odd number of digits

Type of network identification

000CCITT-standardized identification 010National network identification otherSpare

Network identification plan

For CCITT-standardized identification: 0000Unknown

0011Public data network identification code (DNIC), Recommendation X.121

0110 Public land mobile network identification code (MNIC), Recommendation E.212 otherSpare

For national network identification, this information is coded according to national specifications.

Network identification

This information is organized according to the network identification plan and the identified coding principle.

Note: The above values are for standard ITU SS7. Variants of ITU SS7 may have different values. Verify the values for your variant with the appropriate specification, if necessary.

Extended Data Value:

General Information: This value is used only with the following ITU ISUPs: HONG_KONG, AUSTRALIAN, FRENCH, NTT, and JAPAN. It can also be used for national ISUPs, within any particular country, with private designations for the network type. For a national call, such as ANSI, this tag is generated along with 2014.205

MGC Release: Release 7.0 and later.

Cisco Media Gateway Controller Software Release 9 Billing Interface Guide

OL-1089-11 1-93