Cisco Systems OL-1089-11 manual Service Logic ID Tag, AMA Line Number Tag

Chapter 1 Billing Interfaces

CDE Detail Description

Service Logic ID (Tag: 4049)

Table 1-104 Service Logic ID Description Form

Name: Service Logic ID

Tag: 4049

Source: MDL

Description/Purpose: This field value is used in an advanced intelligent network (AIN) environment. It records an identification of service logic in the SCP that was used. The AMAslpID returns from the SCP hold the service logic ID value.

Format: IA5 Length in Octets: 9

Data Value: 000000001 – 899999999

Extended Data Value: No extended value.

General Information: This field value implies that the mediation software (when configured to generate AMA) generates Structure Code 220. (For more details please refer to Telcordia GR-2892-CORE Section 8.)

Note This CDE is not applicable to INAP calls.

MGC Release: Release 7.0 and later.

AMA Line Number (Tag: 4050)

Table 1-105	AMA Line Number Description Form
Name: AMA Line Number		Tag: 4050	Source: MDL

Description/Purpose: This field value is used in an AIN environment. It is included in the Analyzed_Route message. It uses an AIN digits format and contains the original called party ID, incoming terminating number, or ANI.

Format: IA5 Length in Octets: 15

Data Value: Up to a 12-digit line number and a 3-digit line number type.

Extended Data Value: No extended value.

General Information: This field value implies that the mediation software (when configured to generate AMA) generates Structure Code 220 with AMALineNumber to be recorded in Module Code 307. (For more details, please refer to Telcordia GR-2892-CORE Section 8.)

Note The Analyzed_Route message allows up to two AMALineNumber parameters; therefore, the Cisco MGC can save up to two AMA line numbers, and the mediation can generate two module Code 307s.

Note This CDE is not applicable to INAP calls.

MGC Release: Release 7.0 and later.

	Cisco Media Gateway Controller Software Release 9 Billing Interface Guide
OL-1089-11		1-115