Cisco Systems OL-1089-11 Rejecting Location Label Tag, Rejecting Location Label Direction Tag

Chapter 1 Billing Interfaces

CDE Detail Description

Table 1-175 Route Optimization Switchover Timestamp (continued)

Extended Data Value: No extended value.

General Information:

MGC Release: Release 9.6(1) and later.

Rejecting Location Label (Tag: 4232)

Table 1-176	Rejecting Location Label Description Form
Name: Rejecting Location Label		Tag: 4232	Source: MDL
Description/Purpose: Name of the Call-limiting location label which caused the call rejection.
Format: IA5 (string)		Length in Octets: 1–20

Data Value:

String

Example: londonVpnUser652

ANSI/ITU Variations: None.

Extended Data Value: No extended value.

General Information: For calls with location labels defined, a call limiting check must be made once the terminating side is set up. This involves reading internal tables to get call limit data and active call counter data. If the call limit threshold is reached, then the call is rejected against that location label. This record provides the identity of the location label that failed the call.

This tag is only added to the CDB if the call limiting check results in rejection.

MGC Release: Release 9.6(1) and later.

Rejecting Location Label Direction (Tag: 4233)

Table 1-177	Rejecting Location Label Direction Form
Name: Rejecting Location Label Direction		Tag: 4233	Source: MDL

Description/Purpose: Indication of whether or not the call was rejected by a location label relating to the MGC originating (incoming) or terminating (outgoing) side.

Format: BE		Length in Octets: 1
Data Value:
1	= Inbound (MGC originating side)
2	= Outbound (MGC terminating side)

ANSI/ITU Variations: None.

	Cisco Media Gateway Controller Software Release 9 Billing Interface Guide
1-150	OL-1089-11