Cisco Systems OL-1089-11 manual Out protocol ID This is the numeric representation

Chapter 2

MGC Info Subfields

Table 2-1	MGC Info Subfields (continued)
					Location
Field Name		Description	Value/Encoding Scheme		(Position)	Size
Out protocol ID		This is the numeric representation	0	= ISDN PRI	10	1
		of the protocol family for the	1	= C7
		originating side	2	= DPNSS
			3	= CAS
			4	= ASN
			5	= Unknown
			Binary Big-endian
Call Type Flag		This indicates whether the call	0	= Real call	11	1
		was a real or virtual call [used	1	= Virtual Call
		primarily in DPNSS]	Binary Big-endian
Call Feature Flag		This indicates whether the call	0	= Normal Call	12	1
		was a normal call or a feature call	1	= Feature Call
		(that is, call forwarding, or call	Binary Big-endian
		waiting)
C-NOA Pre-translated		Cisco specific: Nature of address			13	1
calling number		(NOA) for pre-translated calling
		number. This field is used for
		backward compatibility.
C-NOA Pre-translated		Cisco specific: NOA for	(		14	1
dialed number		pre-translated dialed number.
		This field is used for backward
		compatibility.
C-NOA Post-translated		Cisco specific:NOA for			15	1
calling number		post-translated calling number.
		This field is used for backward
		compatibility.
C-NOA Post-translated		Cisco specific: NOA for			16	1
dialed number		post-translated dialed number.
		This field is used for backward
		compatibility.
C-CPC Call Type		Cisco specific: Unknown,	0	= Unknown call value	17	1
		ordinary, Priority, Emergency,	1	= Ordinary Call
		Data	2	= Priority Call
			3	= Emergency Call
			5	= Data Call
			(Priority Call & Data Call for
			ANSI SS7 is not supported)

Cisco Media Gateway Controller Software Release 9 Billing Interface Guide

2-2 OL-1089-11