Cisco Systems OL-1089-11 manual Reason Code Tag 3008/ITU, Length in Octets Data Value

Chapter 1 Billing Interfaces

CDE Detail Description

Reason Code (Tag: 3008/ITU)

Table 1-52	Reason Code Description Form
Name: Reason Code		Tag: 3008	Source: MDL

Description/Purpose: Incorporates C7 release with cause values and any additional reasons that the basic call model determines.

Format: based on ITU-T Q.850				Length in Octets: 2
Data Value:
Format:
	8	7	6		5	4	3		2	1
1	Ext.	Coding Standard			Spare			Location
2	Ext.					Cause value

Note: This CDE does not include the Diagnostic and Recommendation octets defined in Q.850. The format of this CDR is the same for both Q.763 and Q.931 signaling.

Extension:

0Octet continues through the next octet (for example, octet 1 to 1a)

1Last octet

Coding Standard

00ITU-T standardized coding

01ISO/IEC standard

10National standard

11Standard specific to identified location

Note: The coding standards other than ITU-T should only be used when the desired cause value cannot be represented with the ITU-T standardized codeing.

Location:

0000 User (U)

0001 Private network serving the local user (LPN)

0010 Public network serving the local user (LN)

0011 Transit network (TN)

0100 Public network serving the remote user (RLN)

0101 Private network serving the remote user (RPN)

0111 International network (INTL)

1010 Network beyond interworking point (BI)

1100

to Reserved for National use 1111

All other values are spare.

Cisco Media Gateway Controller Software Release 9 Billing Interface Guide

OL-1089-11 1-75