Cisco Systems OL-1089-11 Redirection Number Tag, Ingress SigPath ID Tag, Ingress Span ID Tag

Chapter 1 Billing Interfaces

CDE Detail Description

Redirection Number (Tag: 4065)

Table 1-111	Ingress SigPath ID Description Form
Name: Redirection Number		Tag: 4065	Source: MDL
Description/Purpose: This tag contains the digits of the new number when the PGW redirects a call.
Format: IA5		Length in Octets: 1-96
Data Value: Redirection number digits
Extended Data Value: No extended value.
General Information:
MGC Release: Release 9.7 and later.

Ingress SigPath ID (Tag: 4066)

Table 1-112	Ingress SigPath ID Description Form
Name: Ingress SigPath ID		Tag: 4066	Source: MDL/Engine

Description/Purpose: The ingress SigPath ID is used to associate incoming bearer channels with signaling services, such as a destination point code (DPC) in SS7.

Format: BE	Length in Octets: 4
Data Value: 32 bits of binary value
Extended Data Value: No extended value.
General Information:
MGC Release: Release 7 and later.

Ingress Span ID (Tag: 4067)

Table 1-113	Ingress Span ID Description Form
Name: Ingress Span ID		Tag: 4067	Source: MDL/Engine

Description/Purpose: The ingress Span ID is used for incoming PRI bearer channels. A span is a grouping of bearer channels.

Format: BE	Length in Octets: 4
Data Value: 32 bits of binary value
Extended Data Value: No extended value.
General Information:
MGC Release: Release 7 and later.

	Cisco Media Gateway Controller Software Release 9 Billing Interface Guide
1-118	OL-1089-11