Cisco Systems OL-1089-11 manual 110/0010/98 Message not compatible with call state or

Chapter 1 Billing Interfaces

CDE Detail Description

Table 1-53	Cause Information Element/Parameter Definitions (continued)
Cause			Application	Reference	Location
Class/Value/No.		Definition	(Note 1)	(Note 2)	(Note 3)	Remarks
110/0010/98		Message not compatible with call state or	DSS 1	Q.931	U, LN
		message type non-existent or not
		implemented—indicates that the equipment
		sending this cause has received a message
		such that the procedures do not indicate that
		this is a permissible message to receive while
		in the call state, or a STATUS message was
		received indicating an incompatible call state.
110/0011/99		Information element/parameter non-existent	DSS 1, ISUP	Q.931	U, LN
		or not implemented—indicates that the
				2.9.5.2/	TN, INTL,
		equipment sending this cause has received a
				Q.764,	RLN
		message which includes information
				2.9.5.3/
		element(s)/parameter(s) not recognized
				Q.764,
		because the information element
				Annex A/
		identifier(s)/parameter name(s) are not
				Q.763
		defined or are defined but not implemented by
		the equipment sending the cause. This cause
		indicates that the information element(s)/
		parameter(s) were discarded. However, the
		information element is not required to be
		present in the message in order for the
		equipment sending the cause to process the
		message.
110/0100/100		Invalid information element	DSS 1	Q.931	U, LN
		contents—indicates that the equipment
		sending this cause has received an
		information element which it has
		implemented; however, one or more fields in
		the information element are coded in such a
		way which has not been implemented by the
		equipment sending this cause.
110/0101/101		Message not compatible with call	DSS 1	Q.931	U, LN
		state—indicates that a message has been
		received which is incompatible with the call
		state.

Cisco Media Gateway Controller Software Release 9 Billing Interface Guide

1-86 OL-1089-11