Chapter 1 Billing Interfaces
CDE Detail Description
Originating Leg DSP Statistics (Tag: 4098)
Table
Name: Originating Leg DSP Statistics
Tag: 4098
Source: Engine
Description/Purpose: Provides DSP statistics for the originating leg of the call.
On Release 9.7(3), the H.248 Protocol feature is added. Because for H.248 DSP statistics in CDR are not supported, this tag is not logged in to CDR for the H.248 leg.
Format: IA5
Data Value:
Length in Octets: 280 through 794
An example of the statistics generated by the media gateway appears below:
OrigDSPstats...: DSP/TX: PK=data1, SG=data2, NS= data3, DU= data4, VO=,
DSP/RX: VO= , SG= , CF= , RX= , BS= , BP= , LP= , EP= ,
DSP/PD: CU= , MI= , MA= , CO= , IJ= ,
DSP/PE: PC= , IC= , SC= , RM= , BO= , EE= ,
DSP/LE: TP= , TX= , RP= , RM= , BN= , ER= , AC= , TA= , RA= ,
DSP/ER: RD= , TD= , RC= , TC= ,
DSP/IC: IC= ,.
In Release 9.6, the statistics are enhanced to support the DSP Voice Quality Statistics in DLCX Messages feature in Cisco IOS Release 12.4(4)T. The DSP Voice Quality Statistics feature introduces a priority setting on the media gateway that allows control of the impact of statistic generation. There are two priority values: 1, which limits the statistics generated by the media gateway, and 2, which enables all statistics to be generated.
An example of the appearance of the statistics generated when the media gateway is set to priority 1 appears below.
OrigDSPstats…..:DSP/TX: PK=, SG=, NS=, DU=, VO=,
DSP/RX: PK=, SG=, CF=, RX=, VO=, BS=, BP=, LP=, EP=,
DSP/PD: CU=, MI=, MA=, CO=, IJ=,
DSP/LE: TP=, TX=, RP=, RM=, BN=, ER=, AC=,
DSP/EC: CI=, FM=, FP=, VS=, GT=, GR=, JD=, JN=, JM=, JX=,
DSP/CS: CR=, AV=, MX=, CT=, TT=, OK=, CS=, SC=, TS=, DC=,
DSP/DL: RT=, ED=
An example of the appearance of the statistics generated when the media gateway is set to priority 2 appears below.
OrigDSPstats…..:DSP/TX: PK=, SG=, NS=, DU=, VO=,
DSP/RX: PK=, SG=, CF=, RX=, VO=, BS=, BP=, LP=, EP=,
DSP/PD: CU=, MI=, MA=, CO=, IJ=,
DSP/PE: PC=, IC=, SC=, RM=, BO=, EE=,
DSP/LE: TP=, TX=, RP=, RM=, BN=, ER=, AC=,
DSP/ER: RD=, TD=, RC=, TC=,
DSP/IC: IC=,
DSP/EC: CI=, FM=, FP=, VS=, GT=, GR=, JD=, JN=, JM=, JX=,
DSP/KF: KF=, AV=, MI=, BS=, NB=, FL=, NW=, VR=,
DSP/CS: CR=, AV=, MX=, CT=, TT=, OK=, CS=, SC=, TS=, DC=,
DSP/RF: ML=, MC=, R1=, R2=, IF=, ID=, IE=, BL=, R0=, VR=,
DSP/UC: U1=, U2=, T1=, T2=,
DSP/DL: RT=, ED=
|
| Cisco Media Gateway Controller Software Release 9 Billing Interface Guide |
|
| ||
|
|
| ||||
|
|
|
|
| ||
|
|
|
| |||
