Chapter 1 Billing Interfaces

CDE Detail Description

Egress Calling Number Nature of Address (Tag 3018/ITU)

Table 1-60 Egress Calling Number Nature of Address Description Form

Name: Egress Calling Number NOA

Tag: 3018

Source: MDL

Description/Purpose: This CDE records the calling party NOA sent in the outgoing message by the MGC. This field indicates the address type of the calling party. In POTS calling, there are usually two values that are used. They are Unique National Number and Non-unique National Number.

Format: ANSI T1.113

Length in Octet: 1

 

 

Data Value:

0000000 Spare

0000001 Subscriber number (national)

0000010 Unknown (national)

0000011 National (significant) number

0000100 International number

0000101 to Spare 1101111

1110000

to Reserved for national use 1111110

1111111 Spare

Note: The above values are for standard ITU SS7. Variants of ITU SS7 may have different values. Verify the values for your variant with the appropriate specification, if necessary.

Extended Data Value: No extended value.

General Information:

Note This CDE is present in the 1060 CDB if the End-of-Call CDB (1110) is configured. For point-in-call mode, the 1060 CDB is usually a short one and does not contain this CDB.

MGC Release: Release 9.5(2) patch xx.

Cisco Media Gateway Controller Software Release 9 Billing Interface Guide

 

OL-1089-11

1-95

 

 

 

Page 117
Image 117
Cisco Systems OL-1089-11 manual Egress Calling Number Nature of Address Tag 3018/ITU, Format Ansi T1.113 Length in Octet