Cisco Systems OL-1089-11 manual Scale Factor Tag, Test Line Indicator Tag

Chapter 1 Billing Interfaces

CDE Detail Description

Scale Factor (Tag: 4062)

Table 1-109	Scale Factor Description Form
Name: Scale Factor		Tag: 4062	Source: MDL/Engine
Description/Purpose: Used for reporting Advice of Charge information.
Format: BE		Length in Octets: 4

Data Value: The actual value for the scale factor is given by 10^x, where x is the value of the scale factor. The coding of scale factor is as follows; all other values are spare:

— (249)	–7	0.0000001
— (250)	–6	0.000001
— (251)	–5	0.00001
— (252)	–4	0.0001
— (253)	–3	0.001
— (254)	–2	0.01
— (255)	–1	0.1
—	0	1
—	1	10
—	2	100
—	3	1000

Extended Data Value: No extended value.

General Information:

MGC Release: Release 9 and later.

Test Line Indicator (Tag: 4063)

Table 1-110	Test Line Indicator Description Form
Name: Test Line Indicator		Tag: 4063	Source: MDL/Engine
Description/Purpose: The test line indicator is used for reporting the type of test line.
Format: BE		Length in Octets: 4

Data Value: Valid values for the TestLineType integer are:

TYPE_100 = 0

TYPE_102 = 1

TYPE_105 = 2

TYPE_108 = 3

Extended Data Value: No extended value.

General Information:

MGC Release: Release 9 and later.

	Cisco Media Gateway Controller Software Release 9 Billing Interface Guide
OL-1089-11		1-117