Cisco Systems OL-1089-11 manual Short Call Indicator Tag, Charge Limit Exceeded Tag

Chapter 1 Billing Interfaces

CDE Detail Description

Short Call Indicator (Tag: 4217)

Table 1-161 Short Call Indicator Description Form

Name: Short Call Indicator

Tag: 4217

Source: MDL

Description/Purpose: Used to indicate that a call was a short duration call.

Format: BE Length in Octets: 1

Data Value: 1 = Short Call.

Extended Data Value: No extended value.

General Information: The actual period for the timer used to identify short duration calls is configurable between 1 and 30 seconds. This tag is only added to the CDB if the length of the call falls within the defined timeframe.

MGC Release: Release 9.5(2) and later.

Charge Limit Exceeded (Tag: 4218)

Table 1-162	Charge Limit Exceeded Description Form
Name: Charge Limit Exceeded		Tag: 4218	Source: MDL

Description/Purpose: Indicates that a call has exceeded the maximum duration permitted and has been cleared.

Format: BE	Length in Octets: 1
Data Value: 1 = Charge Limit Exceeded
Extended Data Value: No extended value.

General Information: For calls involving charging there is a maximum call duration timer maintained by the CDR manager. If this timer expires, the call is cleared and Charge Limit Exceeded is recorded in this tag. The value used for the timer is obtained from the tariff table or the ApplyCharging SCP procedure. This tag is only added to the CDB if the charge limit is exceeded.

MGC Release: Release 9.5(2) and later.

	Cisco Media Gateway Controller Software Release 9 Billing Interface Guide
OL-1089-11		1-143