Cisco Systems OL-19806-03 manual Energywise importance importance, Energywise keywords word,word

Chapter 1 Managing Single Entities

Manually Managing Power

	Command	Purpose
Step 5
	show energywise	Verifies your entries.
	show energywise domain
Step 6
	copy running-config startup-config	(Optional) Saves your entries in the configuration file.

Configuring Entity Attributes

Beginning in privileged EXEC mode:

	Command	Purpose
Step 1
	configure terminal	Enters global configuration mode.
Step 2
	energywise importance importance	(Optional) Sets the importance.
		The range is from 1 to 100. The default is 1.
Step 3
	energywise keywords word,word,...	(Optional) Assigns at least one keyword.
		When assigning multiple keywords, separate the keywords with
		commas, and do not use spaces between keywords.
		• You can enter alphanumeric characters and symbols such as
		#, (, $, !, and &.
		• Do not enter an asterisk (*) or a blank space between the
		characters or symbols.
		By default, keywords are not defined.
Step 4
	service password-encryption	(Optional) Enables password encryption.
		If youset a hidden password in Step 5 or Step 10, enter this
		command.
Step 5
	energywise management security	(Optional) Sets the management password on the switch that the
	shared-secret [0 7] mgmt-password[port	management station uses to communicate with the domain.
	tcp-port-number]	• (Optional) 0—Uses an unencrypted password.
		• (Optional) 7—Uses a hidden password.
		If you do not enter 0 or 7, the default is 0.
		• For the mgmt-password
		– You can enter alphanumeric characters and symbols such
		as #, (, $, !, and &.
		– Do not enter an asterisk (*) or a blank space between the
		characters or symbols.
		• port tcp-port-number—Specifies the TCP port for
		management access. The range is from 1025 to 65535. The
		default is 43440.
		By default, the management password is not set.

	Cisco EnergyWise Configuration Guide
1-18	OL-19806-03