Cisco Systems OL-19806-03 manual Energywise name name, Energywise role role

Chapter 1 Managing Single Entities

Manually Managing Power

Beginning in privileged EXEC mode:

	Command	Purpose
Step 1
	configure terminal	Enters global configuration mode.
Step 2
	interface interface-id	Specifies the port or the range of ports to be configured, and
		enters interface configuration mode.
Step 3
	energywise importance importance	(Optional) Sets the importance value of the port.
		The range is from 1 to 100. The default is 1.
Step 4
	energywise keywords word,word,...	(Optional) Assigns at least one keyword for the port.
		When assigning multiple keywords, separate the keywords with
		commas, and do not use spaces between keywords.
		• You can enter alphanumeric characters and symbols such as
		#, (, $, !, and &.
		• Do not enter an asterisk (*) or a blank space between the
		characters or symbols.
		By default, keywords are not defined.
Step 5
	energywise name name	(Optional) Specifies the EnergyWise-specific port name.
		• You can enter alphanumeric characters and symbols such as
		#, (, $, !, and &.
		• Do not enter an asterisk (*) or a blank space between the
		characters or symbols.
		The default is a short version of the port name; for example,
		Gi1.0.2 for Gigabit Ethernet 1/0/2.
Step 6
	energywise role role	(Optional) Specifies the role of the port in the domain. For
		example, lobbyport.
		• You can enter alphanumeric characters and symbols such as
		#, (, $, !, and &.
		• Do not enter an asterisk (*) or a blank space between the
		characters or symbols.
		By default, the role is interface.
Step 7
		(Optional) Before entering the energywise activitycheck
		command
		• Verify that auto-QoS is enabled on the port and on the
		connected IP phone.
		• If the switch is connected to the IP phones through multiple
		Cisco devices, verify that they trust the CoS value in
		incoming packets.
		For information about the auto-QoS configuration, see the “Using
		the Call In-Progress Feature” section in the “Managing Single
		Entities” chapter.
		To configure auto-QoS, see the software documentation for your
		Cisco network device.

	Cisco EnergyWise Configuration Guide
OL-19806-03		1-21