Cisco Systems OL-19806-03 Configuring Recurring Events, Energywise activitycheck, Show energywise

Chapter 1 Managing Single Entities

Configuring Recurring Events

	Command	Purpose
Step 8
	energywise activitycheck	(Optional) Verifies that the connected IP phone is not sending or
		receiving traffic before the switch powers off the port.
		Note The switch cannot determine if the IP phone is in the hold
		state.
		To verify that the command takes effect, see the “Auto-QoS and
		EnergyWise Interactions” section in the “Managing Single
		Entities” chapter.
Step 9
	energywise allow query set	(Optional) If the interface receives a query from the management
		station or another domain member, configures the interface to
		respond to a query changing the power level and the EnergyWise
		attributes.
		By default, the switch responds to this query.
Step 10
	end	Returns to privileged EXEC mode.
Step 11
	show running-config	Verifies your entries.
Step 12
	copy running-config startup-config	(Optional) Saves your entries in the configuration file.

Configuring Recurring Events

Beginning in privileged EXEC mode:

	Command	Purpose
Step 1
	show energywise	(Optional) Verifies that EnergyWise is enabled.
Step 2
	configure terminal	Enters global configuration mode.
Step 3
	time-rangetime-range-name	(Optional) Assigns a name to the time range, and enter time-range
		configuration mode. If you do not configure a time range, go to
		Step 6.
		The time range is based on the system clock.
		• If EnergyWise is not running on the end point (for example,
		a PoE end point), the specified times are based on the switch
		time zone.
		• If an agent or client is running on the end point, the specified
		times are based on the end-point time zone.
		Use the absolute and the periodic time-range configuration
		commands to specify times and days for a recurring event. You
		can use one absolute condition and multiple periodic conditions.
		If your absolute or periodic condition has an end time and day,
		the switch ignores these values.

	Cisco EnergyWise Configuration Guide
1-22	OL-19806-03