Security, Udp port | Cisco Systems OL-19806-03 guide

Chapter 3 EnergyWise CLI Commands

energywise (interface configuration)

Command Default

Command Modes

Command History

role role	(Optional) Specifies the role of the port in the domain. For example,
	lobbyport.
	• You can enter alphanumeric characters and symbols such as #, (, %, !,
	and &.
	• Do not enter an asterisk (*) or a blank space between the characters or
	symbols.

domain domain-nameConfigures the EnergyWise domain. See the energywise domain interface

security	configuration command.
{ntp-shared-secret
shared-secret} [0 7]
shared-secret [protocol
udp port
udp-port-number
[interface interface-id
ip ip-address]]

EnergyWise is disabled.

The switch to waits until a Cisco IP phone connected to a PoE port is not sending or receiving traffic before powering off the port.

The switch responds to a query to change the power level and the EnergyWise attributes.

The importance is 1.

Keywords are not defined.

The power level is 10.

The recurring event is not configured.

The name is the short version of the port name; for example, Gi1.0.2 for Gigabit Ethernet 1/0/2.

The role is the model number.

Privileged EXEC

Release Modification

12.2(50)SE This command was introduced on the Catalyst 3750-E, 3750, 3560-E, 3560, and 2960 switches.

12.2(52)SE The activitycheck, allow query {save set}, and recurrence time-range time-range-namekeywords were added on the Catalyst 3750-E, 3750, 3560-E, 3560, and 2960 switches.

12.2(52)SG This command was introduced on Catalyst 4500 switches.

12.2(54)SG The activitycheck, allow query {save set}, and recurrence time-range time-range-namekeywords were added on Catalyst 4500 switches.

12.2(33)SXI4 This command was introduced on the Catalyst 6500 switches. See the Cisco IOS Release Notes for Cisco EnergyWise, EnergyWise Phase 2 for the specific devices.

15.0(1)M2 This command was introduced on Cisco Integrated Service Routers Generation 2 (ISR G2), including Cisco 3900, 2900, and 1900 ISRs.

	Cisco EnergyWise Configuration Guide
3-10	OL-19806-03

Image 54

Cisco Systems OL-19806-03 manual Command Default Command Modes Command History, Security, Udp port

Contents

Cisco EnergyWise Configuration Guide Americas Headquarters Cisco EnergyWise Configuration Guide N T E N T S Important Notice C-1 Audience PurposeConventions Preface Related Publications For information about the Cisco network devices, see Obtaining Documentation, Support, and Security Guidelines Managing Single Entities Overview Network management stations Domain members Creating an EnergyWise Domain Power Levels Category Level Description Recurring Event Definition DefaultsAttributes Secure Domain Communication MIBs Switch Connected to an IP Phone Management station Domain member Switch Connected to a PC Switch and PC Scenario Configuration Guidelines Cisco EnergyWise Configuration Guide Using the Call In-Progress Feature This is the configuration for the PoE port EnergyWise Entity PoE Mode Auto Never Static PoE and EnergyWise Interactions Preventing Network Access to a Non-Cisco End Point CLI Compatibility Issues PC without Access to the EnergyWise Network and the Internet Manually Managing Power Enabling EnergyWise, Configuring Entity Attributes, Command Purpose Energywise keywords word,word Shared-secret 0 7 mgmt-password portEnergywise importance importance Energywise management security Energywise role role Energywise name nameEnergywise neighbor hostname ip-address Energywise allow query save set Energywise level level Copy running-config startup-configInterface interface-id Show energywise children Energywise name name Energywise role role Energywise activitycheck Configuring Recurring EventsShow running-config Energywise allow query set Monday , Tuesday , Wednesday , Thursday , Friday Copy running-config startup-config Energywise level level recurrence importanceShow energywise recurrence Command Mode Purpose Dayofmonth month Dayofweek timerangeDisabling EnergyWise To power on the lab IP phones Examples Automatically Managing Power To power off anIP phone connected to a PoE port If the time range has end times and days such as Pc-mgr Managing Multiple Entities Running Queries Managing Multiple Entities Running Queries Multiple Switches Connected to Multiple End Points Management station End point Domain member Energywise query importance importance Using Queries to Manage Power in the DomainDelta usage timeout timeout Keywords word,word, ... name name collect Optional Runs a query to power on or off the domain members Keywords word,word, ... name name set level Querying with the Name Attribute Setting the Time-Out Value Verify the power levels OL-19806-03 EnergyWise CLI Commands Clear energywise neighbors Endpoint Debug energywiseDebug energywise endpoint management Management Save-Responds to a query to save the running configuration Energywise global configurationDomain member, configures the switch to Energywise allow query save set Neighbor hostname Level levelName name Role role Neighbors are not assigned Role is the model number KeywordsAllow query save set keywords were added Management passwords Activitycheck Energywise interface configurationNo energywise domain Allow query set Importance importance Keywords word,wordRecurrence Time-range Command Default Command Modes Command History SecurityUdp port Absolute Command Description Ntp-shared-secret Energywise domainSecurity Protocol udp port Command Modes Command History Related Commands DescriptionUsage Guidelines Examples Timeout timeout Energywise queryCollect delta usage Members and end points Set level levelSum delta usage Delta-Display the delta vector Switch# energywise query importance 90 name * collect delta These examples show how to filter results with keywords Switch# energywise query importance 90 name * set level Level-change Snmp-server enable traps energywiseEvent-occured Neighbor-added To send EnergyWise traps to the NMS To send only EnergyWise event traps to the NMS Show energywise Switch# show energywise children Domain Cisco Protocol Statistics Energywise interface configuration Energywise global configurationEnables and configures EnergyWise on the entity Configures EnergyWise on the PoE port OL-19806-03 Using CLI Commands Verifying the Power Usage Cisco EnergyWise and Catalyst 4500 Switches OL-19806-03 Cisco EnergyWise and Catalyst 6500 Switches OL-19806-03 Important Notice Disclaimer Cisco EnergyWise Configuration Guide Statement 1071-Warning Definition Bewaar Deze Instructies Warnung Wichtige Sicherheitshinweise Avvertenza Importanti Istruzioni Sulla Sicurezza Aviso Instruções Importantes DE Segurança Guarde Estas Instruções GEM Disse Anvisninger Page OL-19806-03