Examples, To power on the lab IP phones | Cisco Systems OL-19806-03

Chapter 1 Managing Single Entities

Examples

Examples

•Setting the Domain, page 1-26

•Manually Managing Power, page 1-26

•Automatically Managing Power, page 1-27

Note In the examples, the interface-id is in this format: type slot-or-module-number/port-number; for example, gigabitethernet 0/5. To specify an interface, see your device software documentation.

Setting the Domain

Switch# show energywise
Interface	Role	Name	Usage	Lvl	Imp	Type
---------	----	----	-----	---	---	----
	fanfare	jsmith	1009.0(W)	5	100	paren

Switch# configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Switch(config)# energywise domain cisco security ntp-shared-secret cisco protocol udp port

43440 ip 2.2.4.30

Switch(config)#		energywise importance 50
Switch(config)#		energywise keywords lab1,devlab
Switch(config)#		energywise name LabSwitch
Switch(config)#		energywise neighbor member1 43440
Switch(config)#		energywise role role.labaccess
Switch(config)#		energywise allow query save
Switch(config)#		end
Switch# show energywise domain
Name	: member1
Domain	: cisco
Protocol	: udp
IP	: 2.2.2.21
Port	: 43440

Switch# show energywise neighbors

Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge

		S - Switch, H - Host, I - IGMP, r - Repeater, P		- Phone
Id	Neighbor Name	Ip:Port	Prot	Capability
--	-------------	-------	----	----------
1	member-21	2.2.2.21:43440	udp	S I
2	member-31	2.2.4.31:43440	static	S I
3	member-22	2.2.2.22:43440	cdp	S I

Manually Managing Power

			To power on the lab IP phones:
			Switch# configure terminal
			Enter configuration commands, one per line. End with CNTL/Z.
			Switch(config)# energywise domain cisco security shared-secret cisco protocol udp port
			43440 ip 2.2.4.44
			Switch(config)# interface gigabitethernet0/3
			Switch(config-if)#energywise importance 65
			Switch(config-if)#energywise name labphone.5
			Switch(config-if)#energywise role role.labphone
			Switch(config-if)# end
			Cisco EnergyWise Configuration Guide
			Cisco EnergyWise Configuration Guide

	1-26		OL-19806-03
	1-26		OL-19806-03

Image 34

Cisco Systems OL-19806-03 manual Examples, To power on the lab IP phones

Contents

Cisco EnergyWise Configuration Guide Americas Headquarters Cisco EnergyWise Configuration Guide N T E N T S Important Notice C-1 Purpose AudienceConventions Preface Related Publications For information about the Cisco network devices, see Obtaining Documentation, Support, and Security Guidelines Managing Single Entities Overview Network management stations Domain members Creating an EnergyWise Domain Power Levels Category Level Description Recurring Event Definition DefaultsAttributes Secure Domain Communication MIBs Switch Connected to an IP Phone Management station Domain member Switch Connected to a PC Switch and PC Scenario Configuration Guidelines Cisco EnergyWise Configuration Guide Using the Call In-Progress Feature This is the configuration for the PoE port EnergyWise Entity PoE Mode Auto Never Static PoE and EnergyWise Interactions Preventing Network Access to a Non-Cisco End Point CLI Compatibility Issues PC without Access to the EnergyWise Network and the Internet Manually Managing Power Enabling EnergyWise, Configuring Entity Attributes, Command Purpose Energywise keywords word,word Shared-secret 0 7 mgmt-password portEnergywise importance importance Energywise management security Energywise role role Energywise name nameEnergywise neighbor hostname ip-address Energywise allow query save set Energywise level level Copy running-config startup-configInterface interface-id Show energywise children Energywise name name Energywise role role Energywise activitycheck Configuring Recurring EventsShow running-config Energywise allow query set Monday , Tuesday , Wednesday , Thursday , Friday Energywise level level recurrence importance Copy running-config startup-configShow energywise recurrence Dayofmonth month Dayofweek timerange Command Mode PurposeDisabling EnergyWise To power on the lab IP phones Examples Automatically Managing Power To power off anIP phone connected to a PoE port If the time range has end times and days such as Pc-mgr Managing Multiple Entities Running Queries Managing Multiple Entities Running Queries Multiple Switches Connected to Multiple End Points Management station End point Domain member Energywise query importance importance Using Queries to Manage Power in the DomainDelta usage timeout timeout Keywords word,word, ... name name collect Optional Runs a query to power on or off the domain members Keywords word,word, ... name name set level Querying with the Name Attribute Setting the Time-Out Value Verify the power levels OL-19806-03 EnergyWise CLI Commands Clear energywise neighbors Endpoint Debug energywiseDebug energywise endpoint management Management Save-Responds to a query to save the running configuration Energywise global configurationDomain member, configures the switch to Energywise allow query save set Neighbor hostname Level levelName name Role role Keywords Neighbors are not assigned Role is the model numberAllow query save set keywords were added Management passwords Activitycheck Energywise interface configurationNo energywise domain Allow query set Importance importance Keywords word,wordRecurrence Time-range Security Command Default Command Modes Command HistoryUdp port Absolute Command Description Ntp-shared-secret Energywise domainSecurity Protocol udp port Related Commands Description Command Modes Command HistoryUsage Guidelines Examples Energywise query Timeout timeoutCollect delta usage Members and end points Set level levelSum delta usage Delta-Display the delta vector Switch# energywise query importance 90 name * collect delta These examples show how to filter results with keywords Switch# energywise query importance 90 name * set level Level-change Snmp-server enable traps energywiseEvent-occured Neighbor-added To send EnergyWise traps to the NMS To send only EnergyWise event traps to the NMS Show energywise Switch# show energywise children Domain Cisco Protocol Statistics Energywise interface configuration Energywise global configurationEnables and configures EnergyWise on the entity Configures EnergyWise on the PoE port OL-19806-03 Using CLI Commands Verifying the Power Usage Cisco EnergyWise and Catalyst 4500 Switches OL-19806-03 Cisco EnergyWise and Catalyst 6500 Switches OL-19806-03 Important Notice Disclaimer Cisco EnergyWise Configuration Guide Statement 1071-Warning Definition Bewaar Deze Instructies Warnung Wichtige Sicherheitshinweise Avvertenza Importanti Istruzioni Sulla Sicurezza Aviso Instruções Importantes DE Segurança Guarde Estas Instruções GEM Disse Anvisninger Page OL-19806-03