Cisco Systems OL-19806-03 manual Clear energywise neighbors

Chapter 3 EnergyWise CLI Commands

clear energywise neighbors

clear energywise neighbors

Syntax Description

Command Default

Command Modes

To delete the discovered neighbors and end points running agents or clients from the EnergyWise neighbor table, use the clear energywise neighbors command in privileged EXEC mode. The switch immediately rediscovers them.

clear energywise neighbors

This command does not have arguments or keywords.

Default is not defined.

Privileged EXEC

Command History	Release	Modification
	12.2(50)SE	This command was introduced on the Catalyst 3750-E, 3750, 3560-E, 3560, and 2960
		switches.
	12.2(52)SG	This command was introduced on Catalyst 4500 switches.
	12.2(33)SXI4	This command was introduced on the Catalyst 6500 switches. See the Cisco IOS
		Release Notes for Cisco EnergyWise, EnergyWise Phase 2 for the specific devices.
	15.0(1)M2	This command was introduced on Cisco Integrated Service Routers Generation 2
		(ISR G2), including Cisco 3900, 2900, and 1900 ISRs.
	If the end point is a PC running an agent or client and you enter the clear energywise neighbors
Usage Guidelines
	privileged EXEC command, the PC is removed from the neighbor table.
	You can verify that the tables were deleted by entering the show energywise neighbors privileged EXEC
	command.
Examples	This example shows how to delete the neighbor tables:
	Switch# clear energywise neighbors
	Cleared all non static energywise neighbors
Related Commands	Command		Description
	show energywise neighbors		Displays the EnergyWise neighbor tables.

Cisco EnergyWise Configuration Guide

3-2 OL-19806-03