Cisco Systems OL-19806-03 manual Neighbors are not assigned Role is the model number, Keywords

Chapter 3 EnergyWise CLI Commands

energywise (global configuration)

Neighbors are not assigned.

The role is the model number.

Command Modes	Privileged EXEC
Command History	Release	Modification
	12.2(50)SE	This command was introduced on the Catalyst 3750-E, 3750, 3560-E, 3560, and 2960
		switches.
	12.2(52)SE	On the Catalyst 3750-E, 3750, 3560-E, 3560, and 2960 switches
		• The management udp-port-numberkeywords were replaced with the
		management security shared-secret [0 7] shared-secretport tcp-port-number
		keywords.
		• The allow query {save set} keywords were added.
	12.2(52)SG	This command was introduced on Catalyst 4500 switches.
	12.2(54)SG	On Catalyst 4500 switches
		• The management udp-port-numberkeywords were replaced with the
		management security shared-secret [0 7] shared-secretport tcp-port-number
		keywords.
		• The allow query {save set} keywords were added.
	12.2(33)SXI4	This command was introduced on the Catalyst 6500 switches. See the Cisco IOS
		Release Notes for Cisco EnergyWise, EnergyWise Phase 2 for the specific devices.
	15.0(1)M2	This command was introduced on Cisco Integrated Service Routers Generation 2
		(ISR G2), including Cisco 3900, 2900, and 1900 ISRs.
Usage Guidelines	When you add a switch to a domain, EnergyWise is enabled on the switch and its PoE ports.
	When setting a hidden (encrypted) password, enter the service password-encryptionglobal
	configuration command before entering the energywise management security shared-secret 7
	mgmt-password[port tcp-port-number] global configuration command.

If you enter the no energywise level command, the switch does not immediately change the power level to the default. The power level changes when the switch restarts or when you enter the energywise level level command.

Cisco EnergyWise Configuration Guide

3-6 OL-19806-03