2-91
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Chapter 2 Installing the Sun Solaris 10 Operating System
Loading the Sun Solaris 10 Operating Environment
Step 1 Load the Cisco Solaris 10 Operating Environment CD into the CD-ROM drive. From the /var/tmp
directory of the target machine, install the Log And Spool Software by entering the following command:
# cd /var/tmp
# pkgadd -d /cdrom/cdrom0/CSCOh024.pkg
Text similar to the following is displayed:
The following packages are available:
1 CSCOh024 Media Gateway Controller Log and Spool package
(sparc) 3.0(6)
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]:
Note You can also download the Sparc-based log and spool package (CSCOh024) from Cisco.com.
For example, download the CSCOh024 package to the /opt/SW folder on the Sparc-based
platform and use the command, pkgadd -d /opt/SW/CSCOh024.pkg.
Step 2 Press Enter to accept the default answer all. Text similar to the following is displayed:
Processing package instance <CSCOh024 from </var/tmp/CSCOh024.pkg
Media Gateway Controller Log and Spool package(sparc) 3.0(6)
Cisco Systems, Inc.
## Executing checkinstall script.
CSCOh024 checkinstall log file at /var/tmp/CSCOh024.checkinstall.log
Platform is SUNW,Ultra-80
This machine is running Solaris 5.10
The selected base directory </opt/sun_install> must exist before
installation is attempted.
Do you want this directory created now [y,n,?,q] y
Step 3 Answer y and press Enter to create the directory. Text similar to the following is displayed:
Using </opt/sun_install> as the package base directory.
## Processing package information.
## Processing system information.
1 package pathname is already properly installed.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
The following files are already installed on the system and are being
used by another package:
* /opt/sun_install <attribute change only>
* - conflict with a file which does not belong to any package.
Do you want to install these conflicting files [y,n,?,q]
5 0.00
6 0.00
7 0.00
Table 2-4 18-GB Disk 2 Partition Table (Cisco PGW 2200 Softswitch with Log and Spool
Package) (continued)