Cisco Systems PGW 2200 Required Site-Specific Information, Required Machine-Specific Information, Required Tasks

1-3
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Chapter 1 Preparing for Sun Solaris Operating System and Cisco PGW 2200 Softswitch Software Installation
Solaris 10, Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Software Release Preinstallation
Required Site-Specific Information
Your system site administrator can provide the required site-specific information in Table 1- 2. Use the
Notes column in this table to record the information. Several steps in the installation procedure in
Chapter 2, “Installing the Sun Solaris 10 Operating System” require you to provide this information.
Required Machine-Specific Information
Your system site administrator can provide the information called for in Table 1- 3 as it applies to your
target Sun Netra machine. Use the Notes column in this table to record the information. Several steps in
the installation procedure require you to provide this information.
Required Tasks
Before you begin installing the Solaris 10 operating system, perform the tasks listed in Table 1 -4.
Table 1-2 Site-Specific Information
Required Information Notes
Subnet Mask
(Example: 255.255.255.0)
Default router
(Example: 111.11.xxx.1)
DNS server
NTP server IP address
Time zone
(Example: United States (Eastern))
Root password
(Assigned by your system site
administrator)
Table 1-3 Machine-Specific Checklist
Information Notes
Host name of target machine
IP address of target machine
Default router IP address
Additional Ethernet IP address
Subnet address for each additional Ethernet IP address
Netmask address for each additional Ethernet IP address