A-36
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Appendix A XECfgParm.dat File Parameters
Understanding the XECfgParm.dat File Format
ioChanMgr.sessionPauseTimer Amount of time the Cisco PGW 2200 Softswitch waits for a
BSM session set to recover from failure before declaring the
session set failure.
Values: 1–10 seconds.
Default: 8
ioChanMgr.statDiscardThreshold Size of the control queue that triggers discarding of all
queued stat events.
Default: 40
Note Do not change this value.
ioChanMgr.statTimer Frequency, in milliseconds, at which measurements are
collected in the Transpath Input/Output System (TIOS).
Default: 30000 milliseconds
Note Do not change this value.
ioChanMgr.trace Creates unit test tracing of line and channel state machines.
Generates a considerable amount of information to the log.
Set to a value only when you are debugging a particular
problem with line or channel service state problems.
Valu es:
• 0 x 0—Default
• 0 x 1—Trace
Note Do not change this value.
localMID This property is included in the H.248 message from
Cisco PGW 2200 Softswitch to gateway. It can be an IP
address in the format of X.X.X.X, or it can be a domain
name.
Values: String (up to 127 characters)
Default: 0.0.0.0
Note The MgcHeaderAddrType property contains related
information.
logger.daemonAddr Specifies the name of the local socket used by the log server
daemon. The daemon listens for connections on this address,
and client programs attempt to connect to the daemon at this
address.
Default: ../var/log/lsd_addr
Note If this setting is missing from the XECfgParm.dat
file, the log server daemon does not run.
Table A-1 Cisco PGW 2200 Softswitch 9.x XECfgParm.dat File Configuration Parameters
Configuration Parameter Definition