Cisco Systems PGW 2200 D-17

D-17

Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide

OL-18083-01

Appendix D Sample Installation Scripts

Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1)

#------------------------------------------------------------------------------

# Default parameter values have a facility name of "*" and

# will be used if no match is found on a specific facility name

#------------------------------------------------------------------------------

# Specific Facility names are as follows:

# logger - Log Server

# foverd - Failover Daemon

# MML - MML

# procM - Process Manager

# cdrDmpr - CDR Dumper

# cfgM - Configuration Manager

# engine - call processing engine

# ioChanMgr - I/O Channel Managers

# pom - Provisioning Object Manager

# measM - Measurement Manager

# OPERSAGT - Operational SNMP Agent

# PROVSAGT - Provisioning SNMP Agent

# mmSAgt - Measurement Manager SNMP Agent

# almM - Alarm Manager

# replicator- Replicator

# mmdb - TimesTen Main Memory Data Base Process

# amDmpr - Alarm / Measurement Dumper

# ioChanCtl - controls all channel controllers

# SIP - SIP IOCC's global configureation

#----Special Paremeter Section----

# callver - call verification utility

# diskmonitor - disk monitor shell script

# XE - Execution Environment

#------------------------------------------------------------------------------

#---------------- MGC Environment Configuration Tool Usage --------------------

# REQUIRED STARTUP PARAMETERS

# DO NOT MOVE THESE PARAMETERS BEYOND THIS BOX

*.platformId = 1

*.transpathId = 01 # Transpath Id for ASN

*.ownTranspathId = 01

*.peerTranspathId = 02

*.MGC_CDR_NODE_ID = MGC-CDR-NODE-STRING # System Id for CDR

*.desiredPlatformState = standalone

*.virtualFaultTolerant = false # avoid prov-dply/sync on FT mode in egw

*.SysConnectDataAccess = true # true, establish conn. to Data Access Subsystem

*.GWClearChannelAlgorithm = null # clear channel algorithm

*.SipToIsupInterworkingInd = 0 # 0= No Interworking Encountered

# 1= Interworking Encountered

*.AlarmOnActive = false # true, raise an alarm when pgw is active

*.ipAddrLocalA = 10.0.49.43 # 0.0.0.0 # Should be same as

*.IP_Addr1

*.ipAddrLocalB = 0.0.0.0

*.ipAddrPeerA = 0.0.0.0 # Failover peer's address

*.ipAddrPeerB = 0.0.0.0

*.IP_Addr1 = 10.0.49.43 # 0.0.0.0 # Address of interface on

motherboard

*.IP_Addr2 = 0.0.0.0

*.IP_Addr3 = 0.0.0.0

*.IP_Addr4 = 0.0.0.0

# These are Next Hop (router) IP Addresses

# They should be used when the Next Hop address(es)