Cisco Systems PGW 2200 Installing the Opteron-based Communications Software Package (CSCOh036)

2-118

Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide

OL-18083-01

Chapter 2 Installing the Sun Solaris 10 Operating System

Loading the Sun Solaris 10 Operating Environment

Note If you need to disable the ftp communications software, use the svcadm disable ftp command.

If you need to determine the status of the ftp communications software, use the svcs -a | grep

ftp command.

The communications and alarm software installation is now complete. Go to Table 2-2 on page 2-72 if

you want to continue with the list for package installation.

Installing this package adds xterm, ntp, and ftp communications software on your host. To install the

communication software on your hosts, perform the following steps:

Note The installation of this package does not automatically enable ftp communications on your host. If you

are installing this software on a Cisco BAMS system or if your host requires that the ftp communications

be enabled, you can find instructions for enabling ftp in Step 7 of this procedure.

Step 1 Load the Cisco Solaris 10 Operating Environment CD into the CD-ROM drive. Install this package by

entering the following command at the # prompt.

# pkgadd -d /cdrom/cdrom0/CSCOh036.pkg

Text similar to the following is displayed along with copyright and trademark information:

The following packages are available:

1 CSCOh036 Media Gateway Controller PGW Specific Solaris 10 packages

(i386) 3.0(6)

Select package(s) you wish to process (or 'all' to process

all packages). (default: all) [?,??,q]:

Note You can also download the Opteron-based Solaris 10 communications software package

(CSCOh036) from Cisco.com. For example, download the CSCOh036 package to the /opt/SW

folder on the Opteron-based platform and use the command, pkgadd -d

/opt/SW/CSCOh036.pkg.

Step 2 Press Enter to accept the default answer of all and install all the packages. Text similar to the following

is displayed:

Processing package instance <CSCOh036> from </var/tmp/CSCOh036.pkg>

Media Gateway Controller PGW Specific Solaris 10 packages(i386) 3.0(6)

Cisco Systems, Inc.

## Executing checkinstall script.

CSCOh036 checkinstall log file at /var/tmp/CSCOh036.checkinstall.log

Platform is i86pc

This machine is running Solaris 5.10

Using </opt/sun_install> as the package base directory.

## Processing package information.

## Processing system information.

2 package pathnames are already properly installed.