3-13
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher
Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Releases
4 package pathnames are already properly installed.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Do you want to continue with the installation of <CSCOh020> [y,n,?]

Step 3 Enter y and press Enter to continue. Text similar to the following is displayed:

Installing Media Gateway Controller Security package compatible with Solaris 10 as
<CSCOh020>
## Executing preinstall script.
Cisco MGC software or an adjunct was found.
## Installing part 1 of 1.
[ verifying class <none> ]
## Executing postinstall script.
You must now run the install security script
Log in as root
cd /opt/sun_install
and run the command:
./CiscoSec.sh install /tmp/security.log
The machine will have to be rebooted
after the script is run
Installation of <CSCOh020> was successful.

Step 4 Change directory to /opt/sun_install and run the install script by entering the following commands:

# cd /opt/sun_install
# ./CiscoSec.sh install /tmp/security.log
Text similar to the following is displayed:
Output will be logged in install
You are running as root - Good...
Operating System: SunOS 5.10
For security reasons, root access from outside the console
is disabled by default.
Do you want to allow remote root logins? (y/n) [N]

Step 5 If you want to allow remote users to log in as root, perform the following steps. If you do not want to

allow remote users to log in as root, enter n and press Enter, then proceed to Step 6.

a. Type y and press Enter.

Text similar to the following is displayed:
Allowing remote (ie. non-console) root logins
may pose a serious security risk.
Are you sure you want to allow remote root logins? (y/n) [N]

b. Type y and press Enter to continue.