A-13
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Appendix A XECfgParm.dat File Parameters
Understanding the XECfgParm.dat File Format
*.maxLocationLabels
(Added in Release 9.6(1)
Specifies the maximum number of location labels that can be
provisioned.
Valid value: 3000
Note Do not change this value.
*.maxNumDChansPerPort Specifies the maximum number of D-channels that can be
provisioned per IP address or port.
Valid values: Any integer (1 to 2000)
Default value: 2000
*.maxnumRLMports Used during provisioning to verify that the limit on the
number of unique ports for RLM links is not exceeded.
Valu e : 8
Default: 8
*.MgcpBehavior Due to Media Gateway Control Protocol (MGCP) gateway
differences in return codes, the Cisco PGW 2200 Softswitch
MGCP behavior must be configured to the appropriate value
in order to properly interface with the gateway.
Valu e r ang e: Integer
• 0—No action.
–
Do not use this value for switched solutions.
–
Do not change this value for nailed solutions.
• 1—Value for non-IOS-based MGCP gateways such as
VISM.
• 2—Value for IOS-based gateways such as AS5300,
AS5400, and AS5350s.
Default: 0
Table A-1 Cisco PGW 2200 Softswitch 9.x XECfgParm.dat File Configuration Parameters
Configuration Parameter Definition