A-32
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Appendix A XECfgParm.dat File Parameters
Understanding the XECfgParm.dat File Format
foverd.abswitchPort Port used for communication with the A/B switch.
Valu e : /dev/term/x
Example: /dev/term/b
Note If your configuration does not use an A/B switch, use
the default value (/dev/null).
foverd.abswitchTestInterval Time interval in milliseconds between attempts to verify that
an A/B switch is present.
Default: 30000
Note This parameter applies only if your configuration
uses an A/B switch.
foverd.ackTimeout Maximum time, in milliseconds, that the failover daemon
will wait for an ACK or NOACK message to be received
from the peer failover daemon. For each message the failover
daemon sends, the peer failover daemon sends an ACK or
NOACK message to indicate that the peer is still
functioning.
Default: 1000 milliseconds (1 second).
Note You can change the default value to a value more
appropriate for your system installation.
foverd.commRetryInterval Time interval in milliseconds between attempts to open a
connection.
Connection types include:
• Connection to the peer failover daemon
• Connection to the A/B switch
• Connection to the ARU
Default: 30000 milliseconds (30 seconds).
Note You can change the default value to a value more
suited to your system installation.
foverd.conn1Type Sets the connection type for connection number 1.
Values:
• Serial
• Socket
Note Typically, set this value to socket.
foverd.conn2Type Sets the connection type for connection number 2.
Valu es:
• Serial
• Socket
Note Typically, set this value to socket.
Table A-1 Cisco PGW 2200 Softswitch 9.x XECfgParm.dat File Configuration Parameters
Configuration Parameter Definition