Cisco Systems PGW 2200 - page 335

A-23
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Appendix A XECfgParm.dat File Parameters
Understanding the XECfgParm.dat File Format
diskmonitor.PreserveLogs Specifies, along with diskmonitor.SoftLimit, whether
platform log data should be preserved or deleted once the
disk usage percentage set in diskmonitor.Threshold is
reached.
Note Alarm, CDR, and measurement log (under
/var/spool) files are not affected by the settings of
this parameter.
To ensure that logged data can be deleted, this parameter is
set to false. The setting for diskmonitor.SoftLimit has no
impact.
To ensure that logged data is preserved, this parameter is set
to true, and diskmonitor.SoftLimit is set to false.
Default: False
Caution If this function is activated and the DISK alarm is
raised, you must delete the non-required files to
bring the disk utilization below the threshold.
Otherwise, you run the risk of filling the disk and
stopping the Cisco PGW 2200 Softswitch.
diskmonitor.SoftLimit Specifies the action to be taken once the number of days
threshold set in the diskmonitor.Limit parameter is reached.
Works with diskmonitor. Threshold to prevent the disk from
filling up and stopping the Cisco PGW 2200 Softswitch.
If this parameter is set to true, disk monitor deletes files day
by day until the utilization level drops below the threshold.
If this parameter is set to false, disk monitor closes and the
system generates a DISK alarm. The files can then be deleted
manually.
This parameter also works with diskmonitor.PreserveLogs to
specify whether logs are preserved when the disk usage
percentage set in diskmonitor.Threshold is reached. Refer to
the description of the diskmonitor.PreserveLogs parameter
for more information.
Default: False
Caution If this parameter is set to false and the DISK
alarm is raised, you must delete the non-required
files to bring the disk utilization below the
threshold. Otherwise, you run the risk of filling
the disk and stopping the
Cisco PGW 2200 Softswitch.
Table A-1 Cisco PGW 2200 Softswitch 9.x XECfgParm.dat File Configuration Parameters
Configuration Parameter Definition