Cisco Systems PGW 2200

2-104

Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide

OL-18083-01

Chapter 2 Installing the Sun Solaris 10 Operating System

Loading the Sun Solaris 10 Operating Environment

Note The installation of this package does not automatically enable ftp communications on your host. If you

are installing this software on a Cisco BAMS system or if your host requires that the ftp communications

be enabled, you can find instructions for enabling ftp in Step 5 of this procedure.

To install the communications and alarm software on your hosts, perform the following steps:

Step 1 Load the Cisco Solaris 10 Operating Environment CD into the CD-ROM drive. Install this package by

entering the following command at the # prompt:

# pkgadd -d /cdrom/cdrom0/CSCOh026.pkg

Text similar to the following is displayed along with copyright and trademark information:

The following packages are available:

1 CSCOh026 Media Gateway Controller PGW Specific Solaris 10 packages

(sparc) 3.0(6)

Select package(s) you wish to process (or 'all' to process

all packages). (default: all) [?,??,q]:

Note You can also download the Sparc-based communications and alarm software package

(CSCOh026) from Cisco.com. For example, download the CSCOh026 package to the /opt/SW

folder on the Sparc-based platform and use the command, pkgadd -d /opt/SW/CSCOh026.pkg.

Step 2 Press Enter to accept the default answer of all and install all the packages. Text similar to the following

is displayed:

Processing package instance <CSCOh026> from </var/tmp/CSCOh026.pkg>

Media Gateway Controller PGW Specific Solaris 10 packages(sparc) 3.0(6)

Cisco Systems, Inc.

## Executing checkinstall script.

CSCOh026 checkinstall log file at /var/tmp/CSCOh026.checkinstall.log

Platform is SUNW,Sun-Fire-V210

This machine is running Solaris 5.10

Using </opt/sun_install> as the package base directory.

## Processing package information.

## Processing system information.

2 package pathnames are already properly installed.

## Verifying disk space requirements.

## Checking for conflicts with packages already installed.

## Checking for setuid/setgid programs.

This package contains scripts which will be executed with super-user

permission during the process of installing this package.

Do you want to continue with the installation of <CSCOh026> [y,n,?]

Step 3 Type y and press Enter to continue the installation. Text similar to the following is displayed:

Installing Media Gateway Controller PGW Specific Solaris 10 packages as <CSCOh026>

## Installing part 1 of 1.

/opt/sun_install/SolPkg/137324-01.zip

/opt/sun_install/SolPkg <implied directory>

/opt/sun_install/SolPkg/LOM20.tar.gz

/opt/sun_install/SolPkg/SUNWftpr.tar.gz

/opt/sun_install/SolPkg/SUNWftpu.tar.gz