D-12
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Appendix D Sample Installation Scripts
Updated Configuration File Sample
#---------------- MGC Environment Configuration Tool Usage --------------------
# REQUIRED STARTUP PARAMETERS
# DO NOT MOVE THESE PARAMETERS BEYOND THIS BOX
*.platformId = 1
*.transpathId = 01 # Transpath Id for ASN
*.ownTranspathId = 01
*.peerTranspathId = 02
*.MGC_CDR_NODE_ID = MGC-CDR-NODE-STRING # System Id for CDR
*.desiredPlatformState = standalone
*.virtualFaultTolerant = false # avoid prov-dply/sync on FT mode in egw
##### *.SysConnectDataAccess = true # true, establish conn. to Data Access
Subsystem
##### Last modified by mgcusr using MGC Setup Tool: Wed Sep 24 08:22:22 GMT 2008
*.SysConnectDataAccess = false # true, establish conn. to Data Access Subsystem
*.GWClearChannelAlgorithm = null # clear channel algorithm
*.SipToIsupInterworkingInd = 0 # 0= No Interworking Encountered
# 1= Interworking Encountered
*.AlarmOnActive = false # true, raise an alarm when pgw is active
##### *.ipAddrLocalA = 0.0.0.0 # Should be same as *.IP_Addr1
##### Last modified by mgcusr using MGC Setup Tool: Wed Sep 24 08:22:22 GMT 2008
*.ipAddrLocalA = 10.74.49.153 # Should be same as *.IP_Addr1
##### *.ipAddrLocalB = 0.0.0.0
##### Last modified by mgcusr using MGC Setup Tool: Wed Sep 24 08:22:22 GMT 2008
*.ipAddrLocalB = 10.0.49.153
*.ipAddrPeerA = 0.0.0.0 # Failover peer's address
*.ipAddrPeerB = 0.0.0.0
##### *.IP_Addr1 = 0.0.0.0 # Address of interface on motherboard
##### Last modified by mgcusr using MGC Setup Tool: Wed Sep 24 08:22:22 GMT 2008
*.IP_Addr1 = 10.74.49.153 # Address of interface on motherboard
##### *.IP_Addr2 = 0.0.0.0
##### Last modified by mgcusr using MGC Setup Tool: Wed Sep 24 08:22:22 GMT 2008
*.IP_Addr2 = 10.0.49.153
*.IP_Addr3 = 0.0.0.0
*.IP_Addr4 = 0.0.0.0
# These are Next Hop (router) IP Addresses
# They should be used when the Next Hop address(es)
# are different on the two MGC hosts
*.IP_NextHop1 = 0.0.0.0
*.IP_NextHop2 = 0.0.0.0
*.IP_NextHop3 = 0.0.0.0
*.IP_NextHop4 = 0.0.0.0
*.IP_NextHop5 = 0.0.0.0
*.IP_NextHop6 = 0.0.0.0
*.IP_NextHop7 = 0.0.0.0
*.IP_NextHop8 = 0.0.0.0
*.netmaskPeerB = 255.255.255.255
*.netmaskPeerA = 255.255.255.255
*.netmaskLocalB = 255.255.255.255
*.netmaskLocalA = 255.255.255.255
*.Peer_NextHop1 = 0.0.0.0
*.Peer_NextHop2 = 0.0.0.0
*.Peer_NextHop3 = 0.0.0.0
*.Peer_NextHop4 = 0.0.0.0
*.Peer_NextHop5 = 0.0.0.0
*.Peer_NextHop6 = 0.0.0.0
*.Peer_NextHop7 = 0.0.0.0
*.Peer_NextHop8 = 0.0.0.0
################################################################