2-135

Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
OL-18083-01
Chapter 2 Installing the Sun Solaris 10 Operating System
Loading the Sun Solaris 10 Operating Environment
e1000g3
Total number of network interfaces: 4
Number of DVD/CD drives : 1
CD-ROM/DVD drives :
c3t0d0
Number of LOM or TSALARM devices: 0
LOM or TSALARM devices:
Number of SSP devices: 0
ALOM devices:
Number of NALM devices: 0
NALM devices:
Number of (virtual) CPUs : 2
Note: Dual core CPUs count as two virtual CPUs
(virtual) CPUs :
CPU
Amount of physical memory : 8064MB
Amount of swap memory : 10392MB
number of fatal errors : 0
number of errors : 0
********** Fatal Errors **************
******* end of Fatal Errors **********
************* Errors *****************
********** end of Errors *************
PPPPPP AA SSSSSS SSSSSS
PP PP A A SS SS
PPPPPP AAAAAA SSSSSS SSSSSS
PP AA AA SS SS
PP AA AA SSSSSS SSSSSS

Note See Table 2-5 for the approximate amount of time the test will take on the different platforms

supported.

Step 3 Once the test completes, examine the console output and the file /opt/sun_install/vts_script.log. Verify

that the unit passed the test and that the proper number of hard disks and Ethernet interfaces were

detected.

Running a Test in Brief Mode

When run in brief mode, the vts_script tests 1 percent of each disk surface. To run the test in brief mode:

Step 1 Change directories to the /var/tmp directory. Enter the following command: