4.4 Paper Feeding

With the FEED switch pressed once, paper is fed by one line. Paper is fed while it is continuously pressed.

To feed paper, do not pull it forcibly. Use the FEED switch. During pressing the FEED switch, the data can not be received.

Printing does not start while the switch is pressed. Pressing this switch during printing does not feed paper.

NOTE

Do not use a pointed object, such as a pen, to press the FEED switch.

Never apply excessive force to the FEED switch.

4.5Setting Ribbon Cassette

(1)Open the ribbon cover. Be sure to turn off power before opening it.

(2)In case the paper is out from front cover, cut the paper or remove this paper.

(3)Confirming the correct direction of a new ribbon cassette, insert ribbon between the printing head and the platen and press cassette down from the knob side.

(4)Turning the ribbon cassette knob in the arrowed direction, remove slack.

PAPER

FEED

PULL

(5) On replacing a ribbon cassette, pull it out as holding the "PULL" part.

NOTE

Leaving the printer for a long time with a ribbon cassette loaded may cause smudged printing. Continuous printing at low temperature may cause thin printing due to the characteristic of ink.

Do not print without ribbon cassette loaded. Otherwise, print head may be damaged.

Replace the ink ribbon before it is broken by overuse. Do not refill the ink ribbon.

When setting or removing the ribbon cassette, do not apply excessive force to the ribbon cassette or printer. Otherwise, printer malfunction may occur.

Use the specified ink ribbon.

— 16 —

Page 19
Image 19
Citizen Systems CBM920II user manual Paper Feeding, Setting Ribbon Cassette