— 36 —

8. PRINT CONTROL FUNCTION

8.1 List of Control Codes

Code
(Hexadecimal) CBM920 iDP3110
LF 0A Line feed after print O*1 O*1 1
CR 0D Carriage return and line feed O*1 O*1 1
SI 0F Normal size character O O 2
SO 0E Double width character O O 2
RS 1E Double width character O — 2
US 1F Normal size character O — 2
CAN 18 Cancel data O — 3
DC2 12 Inverted character O — 4
DC1 11 Initialize O — 5
ESC + “B” 1B, 42 Feed paper continuously O O 6
ESC + “R” 1B, 52 Select international character O O 7
ESC + “t” 1B, 74 Select code page O O 8
ESC + “/” 1B, 2F Register sentence O — 9
ESC + “! ” 1B, 21 Print registered characters O — 10
ESC + “%” 1B, 25 Enable/Disable registered characters O*2 O*2 11
ESC + “&” 1B, 26 Register user-defined character O*3 O*3 12
ESC + “K” 1B, 4B Print bit image O O 13
FS + “W” 1C, 57, 1 Double height and width character / clear O — 14
ESC + “A” 1B, 41 Set line spacing — O 15
DC4 14 Clear double width character — O 2
DC3 13 Power down function O*4 O*4 16
DC2 12 Power down function — O 16
ESC + “) ” 1B, 29, Change memory switch O O 17
Symbol Function No.
*1:Invalid in some case. Refer to the descriptions for “LF” and “CR”
*2:Invalid in some case. Refer to the descriptions for “Enable/Disable registered characters”.
*3:Function differs by the number of printable columns (specification). Refer to the descriptions for
“Register user-defined character”.
*4: Different in function. Refer to the descriptions for “Power down function”.
Emulation