7.3 Serial Interface Type
Switch No. | Function | OFF | ON | Factory Setting | |
1 | Character direction | Normal | Inverted | OFF | |
2 (920)* | CR command | Ignore CR | CR + LF | OFF | |
2 (3110) | CR command | — | — | OFF | |
3 | Reset in | Disable | Enable | ON | |
4 | Memory switch | Disable Setting | Enable Setting | OFF | |
5 |
|
|
| OFF | |
Transmission rate |
|
| |||
6 | The following reference | OFF | |||
and parity | |||||
7 |
|
| OFF | ||
|
|
| |||
8 |
|
|
| OFF | |
|
|
| |||
|
|
| |||
* Difference may occur in accordance with the emulation set by the memory switch.
Set DIP switch No. 4 to ON. Then turn the printer power on while pressing and holding the FEED switch. The printer enters the manual memory switch setting mode. After manual setting mode, be sure to set this switch to Off.
Baud rate and parity selection
| Switch No. |
| Baud Rate | Parity | Factory Setting | |
8 | 7 | 6 | 5 | (bps) |
|
|
OFF | OFF | OFF | OFF | 4800 | None | O |
OFF | OFF | OFF | ON | 1200 | None | — |
OFF | OFF | ON | OFF | 2400 | None | — |
OFF | OFF | ON | ON | 4800 | None | — |
OFF | ON | OFF | OFF | 9600 | None | — |
OFF | ON | OFF | ON | 19200 | None | — |
OFF | ON | ON | OFF | 1200 | Odd | — |
OFF | ON | ON | ON | 2400 | Odd | — |
ON | OFF | OFF | OFF | 4800 | Odd | — |
ON | OFF | OFF | ON | 9600 | Odd | — |
ON | OFF | ON | OFF | 19200 | Odd | — |
ON | OFF | ON | ON | 1200 | Even | — |
ON | ON | OFF | OFF | 2400 | Even | — |
ON | ON | OFF | ON | 4800 | Even | — |
ON | ON | ON | OFF | 9600 | Even | — |
ON | ON | ON | ON | 19200 | Even | — |
— 35 —
