PRECAUTIONS FOR HANDLING
Do not handle the equipment in the following manners, because problems may result.
●Do not print when there is no recording paper or ink ribbon set in the printer. Otherwise, print head may be damaged.
●Be careful not to drop foreign substances, such as clips, pins, and screws, into the equipment.
●Do not spill any liquid or spray any
●Do not stamp on, drop, hit, or give a strong shock to the equipment.
●Never use a pointed object, such as a pen, to operate the operation panel.
●Do not use Scotch tape to fasten paper together for continuous use.
●Never pull the set paper forcibly or pull the paper in the direction reverse to the paper feed direction.
●Replace the ink ribbon before it is broken by overuse. Do not refill the ink ribbon.
●Remove the ribbon cassette when the printer is left unused for a long time.
●Leaving the printer unused for a long time with a ribbon cassette loaded may cause smudged printing. Continuous printing at low temperature may cause thin printing due to the characteristic of ink.
●Do not deliver the printer with a ribbon cassette and roll paper loaded.
To Prevent Injury and Spreading of Damage
●Do not touch the printing part of the print head.
●While the equipment power is on, do not touch the moving parts, such as a cutter and gear, or electric parts inside the equipment.
●Please place neither hand nor the finger when you open and shut the panel.
●Be careful to avoid bodily injure or damaging other objects with an edge of sheet metal.
●Should any error occur while operating the equipment, stop using it immediately, disconnect the power plug from the plug socket, and then contact your CITIZEN SYSTEMS dealer.
●In case of a failure, do not attempt to disassemble the printer. Refer the repair service to your nearest CITIZEN SYSTEMS dealer or service personnel.
— 5 —
