22
• The Integration Suite Supplemental Pack must be installed on each XenServer host that you want to manage
with SCVMM (either at installation or post-installation).
• Use SCVMM to connect to and manage your XenServer hosts.
6.3. Integration Requirements for SCOM
To enable integration with SCOM the following configuration is required:
• A host running SCOM 2007 R2.
• A XenServer host with storage and networking pre-configured using XenCenter.
• The Integration Suite Supplemental Pack must be installed on each XenServer host that you want to monitor
with SCOM (either at installation or post-installation).
• On each XenServer that you want to monitor with SCOM, on a web browser go to
http://<host.ip.address>/scom
Where <host.ip.address> is the IP address or host name of the XenServer host.
Follow the on screen step by step instructions to install the SCOM Management Pack and to add a XenServer
to SCOM.