Conair MPA, MPW manual Positioning The Control Panel, To raise and swivel the control panel

POSITIONING

THE CONTROL

PANEL

CAUTION: Improper use of the swiveling control panel can damage the unit.

●Do not rotate the control panel 360 degrees. This will twist and possibly damage the control wiring and connections to the motherboard in the electrical enclosure.

●Do not use the control panel handles or control cables to move the chiller. The han- dles are designed only for orientation of the control panel.

●Do not mount the detachable PC-2 control panel to a hot surface.

The control panel on microKool chillers can be swiveled, raised and lowered to provide easy viewing and access. The PC-2 control panel also can be mounted up to 50 feet from the unit, using a remote control cable and the magnetic back on the back of the panel.

To raise and swivel the control panel:

Grasp the black control panel handles, and pull upward. Use the handles to rotate the control panel. Do not rotate the panel 360 degrees.

To lower the control panel:

Grasp the black control panel handles, and rotate the control until it is aligned with the unit. Do not rotate the panel 360 degrees. Gently push down on the handles until the control panel is flush with the unit.

To detach the PC-2 control panel:

The PC-2 control panel may be removed and mounted up to 50 feet from the unit. Do not stretch the cable. The cable is available in various lengths so that you can order the appro- priate cable for your installation.

Grasp the black control panel handles and pull upward. Use the magnetic back to mount the control panel in the remote location. Connect the remote-mounted control to the unit with the cable provided.

4-4 OPERATION microKool Portable Chillers UGH004/0999