![](/images/backgrounds/276884/bgf.png)
I_WARNING
When Mounting an Auxiliary Fence Face, Position Mounting Hardware Beyond Arrow at Bight and Left asIndicated.
Keep Fasteners Away From Blade.
C
D E
I ] ,A,WARNING
Do Not Lift Saw With Rails Debris on rail can misalign
Lor Extensions Tables. the rip fence. Workpiece
could bind or suddenly
F
A WARNING
• Attach Blade GuardAssembly BeforeOperating this Saw•Read Ownerskick back. You could be hit
or cut. Clean debris off
fence rail before
positioning fence.
G,_LLONI
PUSHOFF
H
®A WARNINGTurn Clockwise to
Increase Blade
Angle.
Turn Clockwise to Raise
Blade.
"rumCounterclockwise to
LowerBlade.
• Foryour safety, read owners manual before
operating saw.
• Wear eye p_otection.
• Keep blade guard down and In place for through
cuts.
• Keephands out of path of saw blade.
•Do not perform any operation freehand.
•Know how to reduce the risk of kickback.
See instructions for ripping.
•Never reach around o¢over/Niw blade.
•When ripping, use push stick when fence is set
2 Inches or lees from blade.
•When ripping, use push block and auxllary fence
when fence Is set between 1/2 and 2 inches from
blade. Oo nut make ripcuts narrower than 1/2 Inch.
•Tum off tool and walt for saw blade tostop before
moving workplece orchanging settings.
•Disconnect the saw from the power source before
changing blade or se_icing.
•Do not expose to rbln or use indamp places.
Fig.4 b
15 I:RRFTSMIIN"TABLESAW315.228310