Dell BMX01 owner manual Module Port Mapping-Quarter-Height Blades, Blade n Module

Blade n	I/O Module
Mezz_FAB_B_Blade	Port n
n_Port1
Mezz_FAB_B_Blade	Port n
n_Port2
Mezz_FAB_B_Blade	Port (n+16)
n_Port3
Mezz_FAB_B_Blade	Port (n+16)
n_Port4
Mezz_FAB_C_Blade	Port n
n_Port1
Mezz_FAB_C_Blade	Port n
n_Port2
Mezz_FAB_C_Blade	Port (n+16)
n_Port3
Mezz_FAB_C_Blade	Port (n+16)
n_Port4

I/O Module Port Mapping—Quarter-Height Blades

NOTE: Up to four quarter-height blades are installed in a sleeve. This section includes all four blades when referring to a sleeve.

Standard LOM (Dual-Port) Mapping

Each LOM has two port connections. For a sleeve in enclosure slot n:

•Blade a LOM connection 1 connects to I/O module A1, port n, and connection 2 connects to I/O module A2, port (n+16).

•Blade b LOM connection 1 connects to I/O module A2, port n, and connection 2 connects to I/O module A1, port (n+16).

•Blade c LOM connection 1 connects to I/O module A1, port (n+8), and connection 2 connects to I/O module A2, port (n+24).

•Blade d LOM connection 1 connects to I/O module A2, port (n+8), and connection 2 connects to I/O module A1, port (n+24).

For example, in a sleeve in enclosure slot 8:

•Blade a LOM connection 1 connects to I/O module A1, port 8, and connection 2 connects to I/O module A2, port 24.

•Blade b LOM connection 1 connects to I/O module A2, port 8, and connection 2 connects to I/O module A1, port 24.

•Blade c LOM connection 1 connects to I/O module A1, port 16, and connection 2 connects to I/O module A2, port 32.

•Blade d LOM connection 1 connects to I/O module A2, port 16, and connection 2 connects to I/O module A1, port 32.

46