Removing and installing the system cover

Removing the system cover

Prerequisites

1.Ensure that you read the Safety instructions.

2.Turn off the blade using CMC.

3.Remove the blade from the enclosure.

4.Install the I/O connector cover.

Steps

1.Press the release button and slide the cover toward the back of the blade.

2.Lift the cover away from the blade.

Figure 7. Removing and installing the system cover

 

 

1.

alignment guides on the system cover

2.

system cover

 

and the chassis

 

 

3.

release button

4.

I/O connector cover

Related Links

Removing the blade

39

Page 39
Image 39
Dell M630 owner manual Removing and installing the system cover, Removing the system cover